Expansion Joint Systems

Balco, Inc.
manufacturer details and additional products (0) »

BACKGROUNDProduct image • Product description • Contact information

Description: Expansion Joint Systems for a variety of interior and exterior expansion joint covers.
MasterFormat Number(s): 07 95 00

Manufacturer:

Balco, Inc.
2626 S Sheridan
Wichita, KS 67217

info@balcousa.com
http://www.balcousa.com/
(316) 945-9328 (main)

Distribution Channels:

Manufacturer-direct

PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT

2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS

2.2 SUSTAINABLE PERFORMANCE CRITERIA

2.3 SUSTAINABLE COMPOSITION OF PRODUCT

2.3.1 Composition

List the primary materials in a representative sample of the reported product. (List actual material - not trade name)

95% Aluminum

Composition Manufacturer Comments

Aluminum used maded from 75% recycled content

2.3.2 Toxicity

Does the product contain any California Proposition 65 chemicals?	Yes No
Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List?	Yes No

2.3.3 Recycled Content

Does the product contain any recycled content material?			Yes No
Post-Consumer: Percent by weight of total product: 25 range	Post-Consumer: Description of post-consumer content: Food and beverage
Pre-Consumer: Percent by weight of total product: 50 range	Pre-Consumer: Description of pre-consumer content: post industrial	Total: Percent by weight of total product: 75

If yes, are these measurements certified?			Yes No
Certifying Organization: Raw material Supplier

2.3.6 Emissions

Does the product contain any added Urea Formaldehyde?

Yes No

PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE

3.1 LIFE CYCLE ANALYSIS

Manufacturer Comments

3.2 Material Extraction and Transportation

3.2.1 Regional Materials

Location(s) of manufacturing facility(s) producing the reported product
City, State/Province, Zip, Country: Wichita, KS 67217,USA	City, State/Province, Zip, Country: Oklahoma City, OK 73127,USA







List Primary Raw Materials in Product: (ie. sand, cement, water, recycled glass, clay, wood, biofiber, etc.): (If a significant percent of the raw materials for this product (excluding water) are sourced from a specific location, please also list percent by weight of material in the product and material source location (town, state, country zip code, country). Be as specific as possible regarding each raw material in the product, but leave the location blank if the material is sourced from many different locations.)
Material: Aluminum	Location: Oklahoma City, OK 73127,USA	Percent by weight: 95

3.2.2 Supply Chain

What approximate percent of materials and/or assemblies by weight are sourced from ISO 14001 certified suppliers?
75-100%
How has the company worked with suppliers on reducing the environmental footprint of your supply chain?
Waste from fabrication 100% recycled

3.3 MANUFACTURING

3.3.2 Manufacturing Process

What is the company's specified goal for reducing energy consumption?
Less than 3% of total operating cost	What steps has the company taken to reduce energy consumption of the manufacturing process? 1.5% of total operating cost	What is the percent reduction achieved by unit of product over the specified period? 5
Enter Base year for period. 2000	Enter Reporting year for period. 2008
What is the company's specified goal for reducing potable water use?
Zero Potable water used in process	What steps have been taken to reduce potable water consumption of the manufacturing process? zero % achieved
Enter Base year for period. 2000	Enter Reporting year for period. 2008
What is the company's specified goal for reducing solid waste?
100% recycled waste from process	What steps has the company taken to reduce solid-waste created from the manufacturing process? achieved 100% recycled waste	What is the percent reduction achieved by unit of product over the specified period? 80
Enter Base year for period. 2000	Enter Reporting year for period. 2008
What percent of the waste from the facility goes to hazardous waste, landfill, Waste-To-Energy (WTE), recycled (offsite)?
hazardous waste: 0	landfill: 10
recycled (offsite): 90
Are any Hazardous Air Pollutants (as defined by EPA) created, used, or released during the manufacture of the product?			Yes No
Are any hazardous chemicals created, used, or released during the manufacture of the product which must be reported under the State Right to Know Act (SARA), Section 313 via the Toxics Release Inventory (TRI)? (The absence of hazardous chemicals or air pollutants in manufacture is laudable. However the presence of such hazards is not a simple indicator of environmental impact. Which listed hazards are present, how they are handled, the magnitude of emissions, and the extent and effectiveness of efforts to minimize creation, use, and releases of such hazards, are all important in assessing environmental responsibility. While it can be problematic to try to compare the performance of different companies, a record of TRI releases by company found on the EPA website allows review of a single company over time. http://www.epa.gov/enviro/html/tris/tris_query.html)			Yes No

3.4 CONSTRUCTION

3.4.1 Construction Waste Management

Shipping and Packing Materials (select all that apply for each)
Pallets: Recyclable	Boxes: Recyclable	Packing filler: Recyclable
Containers: Not used	Wrapping: Recyclable
Has the company reduced the amount of packaging required?			Yes No
Are there programs in place to reduce environmental impacts of packaging?			Yes No
If yes, please describe program and results. reuse incoming packaging
Does the design of this product include features that reduce amount of excess material/overage required at installation?			Yes No
What is the typical % excess material/overage? 0

3.4.2 Installation

Accessories: Identify accessory items (adhesives, fasteners, tapes, etc.) required to install product and describe in the comment field any impact on the sustainable performance of the product.

All Fastners are reusable

3.4.3 Contract Closeout

Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs?								Yes No

3.5 FACILITY OPERATIONS

3.6 DECONSTRUCTION / RECYCLING PHASE

3.6.1 Manufacturer/Industry Programs

Is there a maintenance/replacement agreement?								Yes No
Is there a buy-back or take-back program for products at end-of-life?								Yes No
If yes, is there a cost to the customer?

3.6.2 Product Reuse

Is the entire product reusable?

Yes No

3.6.3 Product Recycling / Disposal

Is the product currently being recycled into another product?

Yes No

If yes, describe what new product(s):

Stair Nosing

If yes, what % of annual production is recycled?

ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments

4.1 Stewardship

4.2 Transparency of Information

Manufacturer Comments

COMMENTSThere are currently 0 user comments.

Send Us a Comment

GreenFormat™

SEARCH FOR

Expansion Joint Systems

BACKGROUNDProduct image • Product description • Contact information

PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT

2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS

2.2 SUSTAINABLE PERFORMANCE CRITERIA

2.3 SUSTAINABLE COMPOSITION OF PRODUCT

PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE

3.1 LIFE CYCLE ANALYSIS

Manufacturer Comments

3.2 Material Extraction and Transportation

3.3 MANUFACTURING

3.4 CONSTRUCTION

3.5 FACILITY OPERATIONS

3.6 DECONSTRUCTION / RECYCLING PHASE

ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments

4.1 Stewardship

4.2 Transparency of Information

Manufacturer Comments

COMMENTSThere are currently 0 user comments.

Sponsored By

Questions?

Copyright © 2007-2012

Stay Up to Date with GreenFormat

Has this product, or any product in the product category, gone through a life cycle assessment (LCA)?								Yes No

What is the expected lifespan of the product?
25 years
What is the maximum length of manufacturer's warranty?
5

Are any of the company's buildings/sites certified under a green building rating system?								Yes No


Does the company participate in any voluntary programs to reduce environmental impact of the listed product(s)?								Yes No

Is the environmental information reported in this form available on the website?								Yes No