BACKGROUNDProduct image • Product description • Contact information
Description:
A self-leveling underlayment used to smooth and repair an existing gypsum substrate that is otherwise unsuitable to receive new finish flooring.
ARDEX GS-4 is intended for use as a remedial material for distressed gypsum subfloors that have suffered degradation. It can also be used to smooth over building code-approved structurally sound wood, and over gypsum or wood subfloors that contain hydronic heating tubes or low voltage electrical in-floor heating systems. It can be installed from 1/4” up to virtually any thickness to achieve the desired flatness tolerance. It can be walked on after 3 hours, and floor covering can be installed as soon as the underlayment has dried sufficiently for the floor covering selected. The drying time is a function of temperature, humidity, and the thickness at which the material is applied.
MasterFormat Number(s): 03 54 16
MasterFormat Number(s): 03 54 16
Manufacturer:
ARDEX Engineered Cements
400 Ardex Park Drive
Aliquippa, PA 15001
400 Ardex Park Drive
Aliquippa, PA 15001
Distribution Channels:
- Distributor(/Representative)
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
No information available for this category
2.2 SUSTAINABLE PERFORMANCE CRITERIA
2.2.99 Additional Product Performance
| List essential performance and physical characteristics: (ie. Fire resistance rating, vapor permeability, strength, etc.) | |||||||
|
Characteristic:
Initial Set
|
Measurement test (UL, ASTM, FM, etc):
ASTM C191
|
Results (value,units):
Approx. 30 minutes at 70 degrees F
|
|||||
|
Characteristic:
Final Set
|
Measurement test (UL, ASTM, FM, etc):
ASTM C191
|
Results (value,units):
Approx. 60 minutes at 70 degrees F
|
|||||
|
Characteristic:
Compressive Strength
|
Measurement test (UL, ASTM, FM, etc):
ASTM C109
|
Results (value,units):
4000 psi at 28 days
|
|||||
|
Characteristic:
Flexural Strength
|
Measurement test (UL, ASTM, FM, etc):
ASTM C348
|
Results (value,units):
1500 psi at 28 days
|
|||||
|
Characteristic:
Flammability
|
Measurement test (UL, ASTM, FM, etc):
ASTM E84
|
Results (value,units):
Flame Spreed = 0, Fuel Cont. = 0, Smoke Dev. = 0
|
|||||
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.3.3 Recycled Content
| Does the product contain any recycled content material? | |||||||
|
Post-Consumer: Percent by weight of total product: 0 range |
|||||||
|
Pre-Consumer: Percent by weight of total product: 0 range |
Total: Percent by weight of total product: 0 |
||||||
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
No information available for this category
Manufacturer Comments
No information available for this category
3.2 Material Extraction and Transportation
3.2.1 Regional Materials
| Location(s) of manufacturing facility(s) producing the reported product | |||||||
|
City, State/Province, Zip, Country:
Aliquippa, PA, 15001, USA
|
|||||||
3.3 MANUFACTURING
No information available for this category
3.4 CONSTRUCTION
3.4.1 Construction Waste Management
| Shipping and Packing Materials (select all that apply for each) | |||||||||
|
Pallets:
Reusable
|
Boxes:
Recyclable
|
Packing filler:
Not used
|
|||||||
|
Containers:
Recyclable
|
Wrapping:
Minimized
|
||||||||
| Has the company reduced the amount of packaging required? | Yes No | ||||||||
3.5 FACILITY OPERATIONS
No information available for this category
3.6 DECONSTRUCTION / RECYCLING PHASE
No information available for this category
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
| Are any of the company's buildings/sites certified under a green building rating system? | Yes No | ||||||||
4.2 Transparency of Information
| Is the environmental information reported in this form available on the website? | Yes No | ||||||||
| Does the company have an environmental policy or sustainability plan available on its website? | Yes No | ||||||||
| Does the company produce a corporate sustainability report for public review? | Yes No | ||||||||
| Ingredients or materials that comprise the product are fully disclosed on product packaging or in materials accompanying the product | Yes No | ||||||||
Manufacturer Comments
No information available for this category
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe