RADAR™ ClimaPlus™ High-CAC, High-NRC acoustical ceiling panels
- USG Corporation
- manufacturer details and additional products (25) »
BACKGROUNDProduct image • Product description • Contact information
Description:
RADAR™ ClimaPlus™ High-CAC, High-NRC ceiling panels feature a fresh, clean look with great sound control. They are perfect for conference rooms, open office plans, and privacy rooms.
Economical, all-purpose RADAR™ ClimaPlus™ High-CAC, High-NRC ceiling panels feature a non-directional pattern with a fresh clean appearance that resist sagging. Available in a variety of sizes, they install quickly and also feature Superior Performance which means they contain a patented broad-spectrum antimicrobial standard formulation that inhibits and retards the growth of mold and mildew.
The panels are classified as low-emitting; concentration levels do not exceed the 13.5 ppb limit required by California Special Environmental Requirements, Specifications Section 01350, and the Collaborative for High Performance Schools (CHPS). These panels are also FIRECODE™ formulated to meet life safety codes.
The panels are available with High CAC (40 minimum ceiling attenuation class) that increases room-to-room speech privacy, and they feature high NRC (.70 noise reduction coefficient) for greater sound control in open-plan areas.
The panels offer a 30-year system warranty to withstand temperature and humidity conditions up to 104° F (40° C)/95-percent relative humidity without visible sag when used with a USG DONN® Suspension System. They are guaranteed resistant to mold and mildew growth, subject to normal conditions.
Model or ID numbers: 22310, 22111, 22311, 22121, & 22127
MasterFormat Number(s): 09 51 00, 09 51 00
Model or ID numbers: 22310, 22111, 22311, 22121, & 22127
MasterFormat Number(s): 09 51 00, 09 51 00
Manufacturer:
USG Corporation
550 West Adams Street
Chicago, IL 60661
550 West Adams Street
Chicago, IL 60661
Distribution Channels:
- Distributor(/Representative)
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
2.1.3 Third Party Certification - Indoor Emissions
| CERTIFICATION NAME | Certifying Organization | Level | Certification Number | Activation Date | Length of Term |
| CHPS / CA 01350 | Berkeley Analytical Assoc | Low Emitting | -- | -- | -- |
Manufacturer Comments
| RADAR™ ClimaPlus™ High-CAC, High-NRC acoustical ceiling panels are low-emitting defined as passing the CHPS requirements as establish in Section 3.8 of the “Standard Practice for the Testing of Volatile Organic Emissions from Various Sources Using Small-Scale Environmental Chambers, including 2004 Addendum.” No product can contribute to more than half of each VOC listed with chronic inhalation Reference Exposure Levels adopted by California EPA OEEHA for Prop. 65 chemicals, except Formaldehyde which is set to a maximum limit is 13.5 ppb. |
2.2 SUSTAINABLE PERFORMANCE CRITERIA
2.2.09 Finishes
| Noise Reduction Coefficient (NRC) | |||||||
|
Test Standard:
ASTM C423
|
Results:
0.55/0.70
|
||||||
| Sound Transmission Class (STC) | |||||||
|
Test Standard:
ASTM E1414
|
Results:
40/35
|
||||||
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.3.2 Toxicity
| Does the product contain any California Proposition 65 chemicals? | Yes No | |
| Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List? | Yes No | |
| Is the MSDS and/or a list of toxics available on company website? | Yes No |
2.3.3 Recycled Content
| Does the product contain any recycled content material? | Yes No | ||||||||
|
Post-Consumer: Percent by weight of total product: 1 range |
Post-Consumer: Description of post-consumer content: recycled paper
|
||||||||
|
Pre-Consumer: Percent by weight of total product: 57 range |
Pre-Consumer: Description of pre-consumer content: Slag Wool
|
Total: Percent by weight of total product: 58 |
|||||||
|
Total: Measurement definition: FTC definition
|
|||||||||
Rapidly Renewable Materials Manufacturer Comments
|
RADAR™ ClimaPlus™ High-CAC, High-NRC acoustical ceiling panels contain starch a local rapidly renewable (single year) raw material of about 10% by weight of the finished panel.
|
Emissions Manufacturer Comments
|
RADAR™ ClimaPlus™ High-CAC, High-NRC acoustical ceiling panels are low-emitting defined as passing the CHPS requirements as establish in Section 3.8 of the “Standard Practice for the Testing of Volatile Organic Emissions from Various Sources Using Small-Scale Environmental Chambers, including 2004 Addendum.” No product can contribute to more than half of each VOC listed with chronic inhalation Reference Exposure Levels adopted by California EPA OEEHA for Prop. 65 chemicals, except Formaldehyde which is set to a maximum limit is 13.5 ppb.
|
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
| Has this product, or any product in the product category, gone through a life cycle assessment (LCA)? | Yes No | ||||||||
|
System Used (Please describe the LCA process used as clearly as possible; for example: a process LCA using SimaPro or a hybrid LCA that used GaBi and EIO-LCA).
LCA that used SimaPro
|
|||||||||
| Was the LCA third-party verified? | Yes No | ||||||||
|
Company performing the LCA:
Athena Institute
|
|||||||||
Manufacturer Comments
No information available for this category
3.2 Material Extraction and Transportation
3.2.1 Regional Materials
| Location(s) of manufacturing facility(s) producing the reported product | |||||||
|
City, State/Province, Zip, Country:
Cloquet, MN 55720
|
|||||||
| List Primary Raw Materials in Product: (ie. sand, cement, water, recycled glass, clay, wood, biofiber, etc.): (If a significant percent of the raw materials for this product (excluding water) are sourced from a specific location, please also list percent by weight of material in the product and material source location (town, state, country zip code, country). Be as specific as possible regarding each raw material in the product, but leave the location blank if the material is sourced from many different locations.) | |||||||
|
Material:
Slag Wool
|
Location:
Red Wing, MN 55066
|
Percent by weight:
57 |
|||||
|
Material:
Perlite
|
Location:
Soccorro, NM 87801
|
Percent by weight:
20 |
|||||
|
Material:
Starch
|
Location:
Clinton, MN 56225
|
Percent by weight:
10 |
|||||
|
Material:
Clay
|
Location:
Gleason, TN 38229
|
Percent by weight:
5 |
|||||
|
Material:
Recycled Paper
|
Location:
Cloquet, MN 55720
|
Percent by weight:
1 |
|||||
3.3 MANUFACTURING
No information available for this category
3.4 CONSTRUCTION
3.4.1 Construction Waste Management
| Shipping and Packing Materials (select all that apply for each) | |||||||||
|
Pallets:
Minimized
|
Boxes:
Not used
|
Packing filler:
Not used
|
|||||||
|
Containers:
Not used
|
Wrapping:
Minimized
|
||||||||
| Has the company reduced the amount of packaging required? | Yes No | ||||||||
| Are there programs in place to reduce environmental impacts of packaging? | Yes No | ||||||||
| Does the design of this product include features that reduce amount of excess material/overage required at installation? | Yes No | ||||||||
|
What is the typical % excess material/overage?
1 |
What are the disposition options for excess material?
return
|
||||||||
3.5 FACILITY OPERATIONS
No information available for this category
3.6 DECONSTRUCTION / RECYCLING PHASE
No information available for this category
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
No information available for this category
4.2 Transparency of Information
No information available for this category
Manufacturer Comments
No information available for this category
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe