BACKGROUNDProduct image • Product description • Contact information
Description:
DRIVABLE GRASS is a permeable, flexible and plantable concrete pavement system. It is designed for use in areas where a permeable, and/or a vegetated surface is desired for aesthetic or sustainable reasons.
An engineered grid system allows the product to flex and conform to irregular ground surface contours along pre-defined linear grooves, while providing the intended structural support. The products geometry allows for enhanced root penetration, infiltration and filtration of storm water into the underlying soil, increased on-site storm water storage and minimization of site runoff. DRIVABLE GRASS maintains its load supporting characteristics even when saturated. It is designed for use in areas where a permeable and/or a vegetated surface is required. Examples of successful applications include: vehicle parking areas, fire and service vehicle access lanes, stormwater management systems, vegetated swales, boat ramps, driveways, golf cart paths, walkways, patios and green roofs.
MasterFormat Number(s): 32 12 43
MasterFormat Number(s): 32 12 43
Manufacturer:
Soil Retention
2501 State Street
Carlsbad, CA 92008
2501 State Street
Carlsbad, CA 92008
Distribution Channels:
- Manufacturer-direct
- Distributor(/Representative)
- Wholesale
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
Manufacturer Comments
| Product is concrete |
2.2 SUSTAINABLE PERFORMANCE CRITERIA
2.2.08 Openings
| Are the values provided from testing by NFRC? | Yes No | ||||||||
2.2.32 Exterior Improvements
| What % perviousness is the material? | |||||||
|
61 |
|||||||
2.2.99 Additional Product Performance
| List essential performance and physical characteristics: (ie. Fire resistance rating, vapor permeability, strength, etc.) | |||||||
|
Characteristic:
Compressive strength
|
Measurement test (UL, ASTM, FM, etc):
ASTM C-39
|
Results (value,units):
4,000 psi
|
|||||
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.3.1 Composition
| List the primary materials in a representative sample of the reported product. (List actual material - not trade name) | |||||||
|
aggregate, Portland cement, fly ash, water
|
|||||||
2.3.2 Toxicity
| Does the product contain any California Proposition 65 chemicals? | Yes No | |
| Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List? | Yes No | |
| Is the MSDS and/or a list of toxics available on company website? | Yes No |
2.3.3 Recycled Content
| Does the product contain any recycled content material? | Yes No | ||||||||
|
Post-Consumer: Percent by weight of total product: 0 range |
Post-Consumer: Description of post-consumer content: fly ash
|
||||||||
|
Pre-Consumer: Description of pre-consumer content: recycled concrete
|
|||||||||
| If yes, are these measurements certified? | Yes No | ||||||||
Recycled Content Manufacturer Comments
|
Soil Retention recycles all fabrication generated concrete spoils into its aggregate materials stream
|
2.3.6 Emissions
| For wet-applied products, what is the VOC content? | |||||||||
|
0 g/l |
Measurement Standard:
EPA Reference Test Method 24
|
||||||||
| Will adding the recommended pigments increase VOCs beyond what is stated? | Yes No | ||||||||
| Does the product contain any added Urea Formaldehyde? | Yes No | ||||||||
| What is the product's formaldehyde level? | |||||||||
|
0 ppm |
Measurement Standard:
ASTM E1333
|
||||||||
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
No information available for this category
Manufacturer Comments
No information available for this category
3.2 Material Extraction and Transportation
3.2.1 Regional Materials
| Location(s) of manufacturing facility(s) producing the reported product | |||||||
|
City, State/Province, Zip, Country:
Romoland, CA USA
|
|||||||
| List Primary Raw Materials in Product: (ie. sand, cement, water, recycled glass, clay, wood, biofiber, etc.): (If a significant percent of the raw materials for this product (excluding water) are sourced from a specific location, please also list percent by weight of material in the product and material source location (town, state, country zip code, country). Be as specific as possible regarding each raw material in the product, but leave the location blank if the material is sourced from many different locations.) | |||||||
|
Material:
aggregate
|
|||||||
|
Material:
water
|
|||||||
|
Material:
Portland cement
|
|||||||
|
Material:
fly ash
|
|||||||
3.2.2 Supply Chain
| What approximate percent of materials and/or assemblies by weight are sourced from ISO 14001 certified suppliers? | |||||||
|
don't know
|
|||||||
3.3 MANUFACTURING
3.3.1 Manufacturing and Support Facilities
| Does the company maintain ISO 14001 registration for some or all manufacturing facilities, including international locations? | |||||||||
|
none
|
|||||||||
| Does the company generate energy on-site from renewable resources? | Yes No | ||||||||
| Does the company purchase any thermal energy or electricity from renewable sources? (for electricity this refers to sources that meet the Center for Resource Solutions Green-e Energy National Standard) | Yes No | ||||||||
3.3.2 Manufacturing Process
| What percent of the waste from the facility goes to hazardous waste, landfill, Waste-To-Energy (WTE), recycled (offsite)? | |||||||
|
hazardous waste:
0 |
landfill:
2 |
Waste-To-Energy (WTE):
0 |
|||||
|
recycled (offsite):
0 |
|||||||
3.4 CONSTRUCTION
3.4.1 Construction Waste Management
| Shipping and Packing Materials (select all that apply for each) | |||||||||
|
Pallets:
Reusable
|
Boxes:
Not used
|
Packing filler:
Recyclable
|
|||||||
|
Containers:
Not used
|
Wrapping:
Minimized
|
||||||||
| Has the company reduced the amount of packaging required? | Yes No | ||||||||
3.4.3 Contract Closeout
| Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs? | Yes No | ||||||||
3.5 FACILITY OPERATIONS
3.5.1 Product Lifespan
| What is the expected lifespan of the product? | |||||||
|
25 years |
|||||||
3.6 DECONSTRUCTION / RECYCLING PHASE
3.6.2 Product Reuse
| Is the entire product reusable? | Yes No | ||||||||
| Are components of the product reusable? | Yes No | ||||||||
| If yes to either of the above, do installation techniques allow it to be easily removed/disassembled without damage? | Yes No | ||||||||
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
| Are any of the company's buildings/sites certified under a green building rating system? | Yes No | ||||||||
4.2 Transparency of Information
No information available for this category
Manufacturer Comments
No information available for this category
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe