BACKGROUNDProduct image • Product description • Contact information
Model or ID numbers: Ram Tough 250 Rubberized Asphalt Membrane
MasterFormat Number(s): 07 55 63
PO Box 421
33 Stonehouse Road
Millington, NJ 07946
- Manufacturer-direct
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
| CERTIFICATION NAME | Certifying Organization | Level | Certification Number | Activation Date | Length of Term |
| Other | Underwriters Laboratories | Class A System | Class A | -- | 120 months |
| 2.1 Sustainable Standards and Certifications; EPA/DOE EnergyStar Certified Partner. |
2.2 SUSTAINABLE PERFORMANCE CRITERIA
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
| Does the product contain any California Proposition 65 chemicals? | Yes No | |
| Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List? | Yes No |
| Does the product contain any recycled content material? | Yes No | ||||||||
|
Post-Consumer: Percent by weight of total product: 25 range |
Post-Consumer: Description of post-consumer content: Tire Crumb Rubber
|
||||||||
|
Pre-Consumer: Percent by weight of total product: 25 range |
Pre-Consumer: Description of pre-consumer content: Oil, Refinery Flux
|
Total: Percent by weight of total product: 50 |
|||||||
| If yes, are these measurements certified? | Yes No | ||||||||
| Does the product contain any rapidly renewable materials? | Yes No | ||||||||
| Is the rapidly-renewable materials content certified? | Yes No | ||||||||
| Does the product consist of essentially a salvaged, refurbished, or reused material? | Yes No | ||||||||
| For wet-applied products, what is the VOC content? | |||||||
|
0 g/l |
Measurement Standard:
EPA Reference Test Method 24
|
||||||
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
| Has this product, or any product in the product category, gone through a life cycle assessment (LCA)? | Yes No | ||||||||
Manufacturer Comments
|
Protection of roof membranes results in a longer moisture protection system lifespan. It is estimated that green roofs will last two to three times longer than conventional roofs, resulting in less waste going to dumps and landfills, less consumption of materials with significant energy savings.
|
3.2 Material Extraction and Transportation
| Location(s) of manufacturing facility(s) producing the reported product | |||||||
|
City, State/Province, Zip, Country:
Allentown, PA
|
City, State/Province, Zip, Country:
Halls, TN
|
||||||
| List Primary Raw Materials in Product: (ie. sand, cement, water, recycled glass, clay, wood, biofiber, etc.): (If a significant percent of the raw materials for this product (excluding water) are sourced from a specific location, please also list percent by weight of material in the product and material source location (town, state, country zip code, country). Be as specific as possible regarding each raw material in the product, but leave the location blank if the material is sourced from many different locations.) | |||||||
|
Material:
Post Consumer Tire Crumb Rubber
|
Location:
Allentown, PA
|
Percent by weight:
0 |
|||||
|
Material:
Pre Consumer Oil, Refinery Flux
|
Location:
Allentown, PA
|
Percent by weight:
0 |
|||||
|
Material:
|
Percent by weight:
|
||||||
| What approximate percent of materials and/or assemblies by weight are sourced from ISO 14001 certified suppliers? | |||||||
|
under 25%
|
|||||||
3.3 MANUFACTURING
| Does the company maintain ISO 14001 registration for some or all manufacturing facilities, including international locations? | |||||||||
|
some
|
|||||||||
| Does the company generate energy on-site from renewable resources? | Yes No | ||||||||
| Does the company purchase any thermal energy or electricity from renewable sources? (for electricity this refers to sources that meet the Center for Resource Solutions Green-e Energy National Standard) | Yes No | ||||||||
| What is the company's specified goal for reducing energy consumption? | |||||||||
|
Greenroof Roofscape systems have the potential to reduce the size of HVAC equipment on new buildings, reduce the amount of standard insulation, incorporate cooling and/or water treatment function and reducing or eliminating stormwater runoff. The system also reduces the heat island effect and contributes to significant reduction of the buildings carbon footprint.
|
What steps has the company taken to reduce energy consumption of the manufacturing process?
We look forward to incorporating energy efficiency within our manufacturing plants later this year.
|
||||||||
| Are any Hazardous Air Pollutants (as defined by EPA) created, used, or released during the manufacture of the product? | Yes No | ||||||||
3.4 CONSTRUCTION
| Shipping and Packing Materials (select all that apply for each) | |||||||||
|
Pallets:
Reusable
|
Boxes:
Recyclable
|
Packing filler:
Reusable
|
|||||||
|
Containers:
Recyclable
|
Wrapping:
Reusable
|
||||||||
| Has the company reduced the amount of packaging required? | Yes No | ||||||||
| Are there programs in place to reduce environmental impacts of packaging? | Yes No | ||||||||
| Does the design of this product include features that reduce amount of excess material/overage required at installation? | Yes No | ||||||||
|
What is the typical % excess material/overage?
10 |
What are the disposition options for excess material?
Recycle
|
||||||||
3.5 FACILITY OPERATIONS
|
All components can be recycled with existing recycle channels.
|
3.6 DECONSTRUCTION / RECYCLING PHASE
| Is there a maintenance/replacement agreement? | Yes No | ||||||||
| Is there a buy-back or take-back program for products at end-of-life? | Yes No | ||||||||
| If yes, is there a cost to the customer? | |||||||||
| For the manufacturing take-back program, what is the recycling rate for take-back product relative to your annual production in lbs? | |||||||||
|
100 |
|||||||||
| Is the entire product reusable? | Yes No | ||||||||
| Are components of the product reusable? | Yes No | ||||||||
| If yes to either of the above, do installation techniques allow it to be easily removed/disassembled without damage? | Yes No | ||||||||
| Is the product currently being recycled into another product? | Yes No | ||||||||
| Is product 100% biodegradable? | Yes No | ||||||||
| Is product 100% compostable? | Yes No | ||||||||
| Does product require disposal in a landfill? | Yes No | ||||||||
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
| What awards and recognition has the company achieved or received for its environmental stewardship? | |||||||||
|
Green Roofs for Healthy Cities 2005, 2006, 2007, 2008 and 2009 Award for Excellance.
|
|||||||||
| Are there other environmental groups that also list the product(s)? | |||||||||
|
Greenroofs.org
|
Is this product GreenSpec listed? | Yes No | |||||||
| Does the company participate in any voluntary programs to reduce environmental impact of the listed product(s)? | Yes No | ||||||||
|
If yes, identify program(s) (select all that apply):
other
|
|||||||||
4.2 Transparency of Information
| Is the environmental information reported in this form available on the website? | Yes No | ||||||||
|
If yes link to webpage(s):
www.barrettroofs.com
|
|||||||||
| Does the company have an environmental policy or sustainability plan available on its website? | Yes No | ||||||||
| Does the company produce a corporate sustainability report for public review? | Yes No | ||||||||
| Ingredients or materials that comprise the product are fully disclosed on product packaging or in materials accompanying the product | Yes No | ||||||||
Subscribe