Whole House Fan Shutter Cover
- Battic Door Energy Conservation Products
- manufacturer details and additional products (6) »
BACKGROUNDProduct image • Product description • Contact information
Description:
Battic Door Energy Conservation Products introduces the Whole House Attic Fan Insulation Shutter Seals and Covers for Energy Star Home and Green Building Contractors.
The Battic Door Whole House Attic Fan Ceiling Shutter Seal is an energy-saving insulating seal for Whole House Attic Fans. It reduces air-leakage through the whole house attic fan saving the homeowner heating and cooling loss and energy costs.
The Battic© Door Whole House Attic Fan Ceiling Shutter Seal is easily installed over the fan louver from the house side in the fall and removed in the spring.
By reducing the amount of heat and moisture leaking into your attic, the severity of ice dams and attic mold is greatly reduced!
Available Factory Direct by mail order.
For complete details, visit on line at http://www.batticdoor.com, or tel. 508.320.9082 or email info@batticdoor.com
Battic Door Energy Conservation Products manufactures and distributes low-cost, high-value, energy conservation products for the SIX largest overlooked "holes" in the house:
The pull-down attic stairs, the whole house fan and A/C return, the fireplace, the clothes dryer exhaust duct, the bathroom exhaust fan duct, and the attic access door hatch.
By sealing these "holes", air leaks, cold drafts, and wasted energy are reduced. The products work year 'round by reducing cold drafts and heat loss in the winter, as well as air-conditioning loss in the summer.
The products conserve energy, lower your utility bills, reduce noise and pollutants, improve indoor air quality, reduce the chance of ice dams and attic mold, and improve the comfort of your home. Contractors preferred supplier, the products are available direct to customers by mail order, also available in bulk to builders, weatherization contractors, and distributors.
Visit Battic Door Energy Conservation Products on line at http://www.batticdoor.com, or tel. 508.320.9082 or email info@batticdoor.com.
Model or ID numbers: SMSS
MasterFormat Number(s): 11 33 00, 08 31 13, 07 00 00, 07 20 00, 08 00 00, 10 00 00, 23 00 00, 23 34 00, 11 30 00
Model or ID numbers: SMSS
MasterFormat Number(s): 11 33 00, 08 31 13, 07 00 00, 07 20 00, 08 00 00, 10 00 00, 23 00 00, 23 34 00, 11 30 00
Manufacturer:
Battic Door Energy Conservation Products
P.O. Box 15
Mansfield, MA 02048
P.O. Box 15
Mansfield, MA 02048
Distribution Channels:
- Manufacturer-direct
- Distributor(/Representative)
- Wholesale
- Internet-only
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
2.1.5 Second Party Certification Program - Whole Product Sustainability
| CERTIFICATION NAME | Certifying Organization | Level | Certification Number | Activation Date | Testing Organization* | Length of Term |
| Other | Energy Design Update | -- | June 2008 | 2008-01-06 | -- | 24 months |
2.1.8 Second Party Certification Program - Other Certification Categories
| CERTIFICATION NAME | Certifying Organization | Level | Certification Number | Activation Date | Length of Term |
| Other | Green Products Guide | -- | -- | 2008-01-01 | 48 months |
2.1.9 Self-Declaration of Compliance - Whole Product Sustainability
| CERTIFICATION NAME | Certifying Organization | Level | Certification / Standard Number | Testing Organization | Test Date |
| Other | Battic Door | -- | -- | Battic Door | 2008-01-01 |
2.1.12 Self-Declaration of Compliance - Other Certification Categories
| CERTIFICATION NAME | Standards Organization/Agency | Standard Number | Testing Organization | Test Date |
| Other | Battic Door | -- | Battic Door | 2008-01-01 |
Manufacturer Comments
| Triple gaskets, R-42. |
2.2 SUSTAINABLE PERFORMANCE CRITERIA
2.2.99 Additional Product Performance
| List essential performance and physical characteristics: (ie. Fire resistance rating, vapor permeability, strength, etc.) | |||||||
|
Characteristic:
Air Tightness, Gaskets
|
Measurement test (UL, ASTM, FM, etc):
calculated
|
Results (value,units):
triple gaskets, closed cell
|
|||||
|
Characteristic:
R Value
|
Measurement test (UL, ASTM, FM, etc):
calculated
|
Results (value,units):
42
|
|||||
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.3.3 Recycled Content
| Does the product contain any recycled content material? | Yes No | ||||||||
|
Post-Consumer: Percent by weight of total product: 50 range |
Post-Consumer: Description of post-consumer content: eps
|
||||||||
|
Pre-Consumer: Percent by weight of total product: 50 range |
Pre-Consumer: Description of pre-consumer content: wood
|
Total: Percent by weight of total product: 100 |
|||||||
2.3.6 Emissions
| What is the product's formaldehyde level? | |||||||
|
0 ppm |
Measurement Standard:
ASTM E1333
|
||||||
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
No information available for this category
Manufacturer Comments
No information available for this category
3.2 Material Extraction and Transportation
3.2.1 Regional Materials
| Location(s) of manufacturing facility(s) producing the reported product | |||||||
|
City, State/Province, Zip, Country:
Mansfield, MA 02048, USA
|
|||||||
| List Primary Raw Materials in Product: (ie. sand, cement, water, recycled glass, clay, wood, biofiber, etc.): (If a significant percent of the raw materials for this product (excluding water) are sourced from a specific location, please also list percent by weight of material in the product and material source location (town, state, country zip code, country). Be as specific as possible regarding each raw material in the product, but leave the location blank if the material is sourced from many different locations.) | |||||||
|
Material:
wood
|
Percent by weight:
67 |
||||||
|
Material:
eps
|
Percent by weight:
32 |
||||||
|
Material:
rubber gaskets
|
Percent by weight:
1 |
||||||
3.2.2 Supply Chain
| What approximate percent of materials and/or assemblies by weight are sourced from ISO 14001 certified suppliers? | |||||||
|
75-100%
|
|||||||
| How has the company worked with suppliers on reducing the environmental footprint of your supply chain? | |||||||
|
minimized transportation, can ship direct from factory
|
|||||||
3.3 MANUFACTURING
3.3.1 Manufacturing and Support Facilities
| Does the company maintain ISO 14001 registration for some or all manufacturing facilities, including international locations? | |||||||||
|
all
|
|||||||||
| Does the company generate energy on-site from renewable resources? | Yes No | ||||||||
|
Resulting reduction of purchased energy (fuels and electricity):
10 |
|||||||||
| Does the company purchase any thermal energy or electricity from renewable sources? (for electricity this refers to sources that meet the Center for Resource Solutions Green-e Energy National Standard) | Yes No | ||||||||
|
If yes, percent of purchased thermal or electrical energy from renewable energy sources:
10 for manufacturing plant |
If yes, percent of purchased thermal or electrical energy from renewable energy sources:
10 of total company purchase |
||||||||
3.3.2 Manufacturing Process
| Are any Hazardous Air Pollutants (as defined by EPA) created, used, or released during the manufacture of the product? | Yes No | ||||||||
|
Are any hazardous chemicals created, used, or released during the manufacture of the product which must be reported under the State Right to Know Act (SARA), Section 313 via the Toxics Release Inventory (TRI)? (The absence of hazardous chemicals or air pollutants in manufacture is laudable. However the presence of such hazards is not a simple indicator of environmental impact. Which listed hazards are present, how they are handled, the magnitude of emissions, and the extent and effectiveness of efforts to minimize creation, use, and releases of such hazards, are all important in assessing environmental responsibility. While it can be problematic to try to compare the performance of different companies, a record of TRI releases by company found on the EPA website allows review of a single company over time. http://www.epa.gov/enviro/html/tris/tris_query.html) |
Yes No | ||||||||
3.4 CONSTRUCTION
3.4.1 Construction Waste Management
| Shipping and Packing Materials (select all that apply for each) | |||||||||
|
Pallets:
Not used
|
Boxes:
Recyclable
|
Packing filler:
Not used
|
|||||||
|
Containers:
Not used
|
Wrapping:
Not used
|
||||||||
| Has the company reduced the amount of packaging required? | Yes No | ||||||||
| Are there programs in place to reduce environmental impacts of packaging? | Yes No | ||||||||
| Does the design of this product include features that reduce amount of excess material/overage required at installation? | Yes No | ||||||||
|
What is the typical % excess material/overage?
0 |
|||||||||
3.4.2 Installation
| Accessories: Identify accessory items (adhesives, fasteners, tapes, etc.) required to install product and describe in the comment field any impact on the sustainable performance of the product. | |||||||
|
fasteners
|
|||||||
3.4.3 Contract Closeout
| Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs? | Yes No | ||||||||
3.5 FACILITY OPERATIONS
3.5.1 Product Lifespan
| What is the expected lifespan of the product? | |||||||
|
50 years |
|||||||
| What is the maximum length of manufacturer's warranty? | |||||||
|
2
|
|||||||
3.6 DECONSTRUCTION / RECYCLING PHASE
3.6.1 Manufacturer/Industry Programs
| Is there a maintenance/replacement agreement? | Yes No | ||||||||
3.6.2 Product Reuse
| Is the entire product reusable? | Yes No | ||||||||
| Are components of the product reusable? | Yes No | ||||||||
| If yes to either of the above, do installation techniques allow it to be easily removed/disassembled without damage? | Yes No | ||||||||
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
| Are there other environmental groups that also list the product(s)? | |||||||||
| Is this product GreenSpec listed? | Yes No | ||||||||
| Does the company participate in any voluntary programs to reduce environmental impact of the listed product(s)? | Yes No | ||||||||
|
If yes, identify program(s) (select all that apply):
Wastewise,Formulators Project,Performance Track,US EPA DfE
|
|||||||||
4.2 Transparency of Information
| Is the environmental information reported in this form available on the website? | Yes No | ||||||||
|
If yes link to webpage(s):
www.batticdoor.com
|
|||||||||
| Does the company have an environmental policy or sustainability plan available on its website? | Yes No | ||||||||
| Does the company produce a corporate sustainability report for public review? | Yes No | ||||||||
| Ingredients or materials that comprise the product are fully disclosed on product packaging or in materials accompanying the product | Yes No | ||||||||
Manufacturer Comments
No information available for this category
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe