BACKGROUNDProduct image • Product description • Contact information
Model or ID numbers: SLP-TRK series
MasterFormat Number(s): 07 84 00, 05 40 00, 09 22 16, 09 29 00
Post Office Box 188619
Sacramento, CA 95818
- Distributor(/Representative)
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
| CERTIFICATION NAME | Certifying Organization | Level | Certification Number | Activation Date | Length of Term |
| Other | ICC Evaluation Service | -- | ESR-1042 | 2006-04-01 | -- |
2.2 SUSTAINABLE PERFORMANCE CRITERIA
| List essential performance and physical characteristics: (ie. Fire resistance rating, vapor permeability, strength, etc.) | |||||||
|
Characteristic:
Fire resistance of joint systems
|
Measurement test (UL, ASTM, FM, etc):
UL 2079
|
Results (value,units):
Accepted per ESR-1042
|
|||||
|
Characteristic:
Fire resistance
|
Measurement test (UL, ASTM, FM, etc):
UL HW-D- series
|
Results (value,units):
Per assembly design, up to 4 hours
|
|||||
|
Characteristic:
Engineered cold-formed metal framing
|
Measurement test (UL, ASTM, FM, etc):
ICC-ES AC46
|
Results (value,units):
Accepted per ESR-1042
|
|||||
|
Characteristic:
Corrosion resistance
|
Measurement test (UL, ASTM, FM, etc):
ASTM A1003
|
Results (value,units):
G40 and G60 standard; G90 by special order
|
|||||
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
| List the primary materials in a representative sample of the reported product. (List actual material - not trade name) | |||||||
|
Galvanized steel sheet
|
|||||||
| Does the product contain any California Proposition 65 chemicals? | Yes No | |
| Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List? | Yes No |
| Does the product contain any recycled content material? | Yes No | ||||||||
|
Post-Consumer: Percent by weight of total product: 26 range |
Post-Consumer: Description of post-consumer content: steel
|
||||||||
|
Pre-Consumer: Percent by weight of total product: 7 range |
Pre-Consumer: Description of pre-consumer content: steel
|
Total: Percent by weight of total product: 33 |
|||||||
|
These calculations are based upon information provided by the Steel Recycling Institute. The methods for calculating the recycled content of steel produced by basic oxygen furnace and electric arc furnace were applied to Dietrich Metal Framing’s steel purchasing patterns.
|
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
Manufacturer Comments
3.2 Material Extraction and Transportation
| Location(s) of manufacturing facility(s) producing the reported product | |||||||
|
City, State/Province, Zip, Country:
92324
|
City, State/Province, Zip, Country:
44483
|
||||||
| List Primary Raw Materials in Product: (ie. sand, cement, water, recycled glass, clay, wood, biofiber, etc.): (If a significant percent of the raw materials for this product (excluding water) are sourced from a specific location, please also list percent by weight of material in the product and material source location (town, state, country zip code, country). Be as specific as possible regarding each raw material in the product, but leave the location blank if the material is sourced from many different locations.) | |||||||
|
Material:
Steel
|
|||||||
|
Material:
Zinc
|
|||||||
3.3 MANUFACTURING
3.4 CONSTRUCTION
| Shipping and Packing Materials (select all that apply for each) | |||||||||
|
Pallets:
Not used
|
Boxes:
Not used
|
Packing filler:
Not used
|
|||||||
|
Containers:
Not used
|
Wrapping:
Minimized
|
Other:
Direct-inked paperless labeling
|
|||||||
| Has the company reduced the amount of packaging required? | Yes No | ||||||||
| Does the design of this product include features that reduce amount of excess material/overage required at installation? | Yes No | ||||||||
|
What is the typical % excess material/overage?
5 |
What are the disposition options for excess material?
recycle
|
||||||||
| Accessories: Identify accessory items (adhesives, fasteners, tapes, etc.) required to install product and describe in the comment field any impact on the sustainable performance of the product. | |||||||
|
Studs are screw-attached to slotted track through slots, allowing vertical movement but preventing lateral movement. Slotted track construction substitutes for double-track head of wall joint construction and reduces requirements for bridging and strapping members in metal stud walls.
|
|||||||
| Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs? | Yes No | ||||||||
3.5 FACILITY OPERATIONS
3.6 DECONSTRUCTION / RECYCLING PHASE
| Is the entire product reusable? | Yes No | ||||||||
| Are components of the product reusable? | Yes No | ||||||||
| If yes to either of the above, do installation techniques allow it to be easily removed/disassembled without damage? | Yes No | ||||||||
| Is the product currently being recycled into another product? | Yes No | ||||||||
|
If yes, describe what new product(s):
Steel
|
|||||||||
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
| Please describe what Design-for-Environment (DfE) strategies were used in design of this product (including such practices as dematerialization, and design-for-disassembly), company-wide approach to DfE, and other aspects that you feel exemplify commitment but have not been quantified elsewhere in this form. | |||||||
|
Slotted track is designed on the principle of dematerialization. It eliminates the need for nested double top tracks and reduces or eliminates the need for bridging and strapping members. System is also designed for disassembly. Slotted tracks are undamaged when fasteners are unscrewed, so members can be reused if partitions need to be reconfigured. System's efficient installation reduces energy required on site for installation, by reducing the numbers of members and fasteners required.
|
|||||||
4.2 Transparency of Information
| Ingredients or materials that comprise the product are fully disclosed on product packaging or in materials accompanying the product | Yes No | ||||||||
Manufacturer Comments
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe