Terra, Tuscany, Terra Green, and Tuscany Green Decorative Cement Plasters
- TexSton Industries, Inc.
- manufacturer details and additional products (2) »
BACKGROUNDProduct image • Product description • Contact information
Description:
TexSton decorative cement plasters can be used to create a variety of finishes, replicating ancient patinas or creating contemporary styles that provide a rich visual finish.
MasterFormat Number(s): 09 24 00
MasterFormat Number(s): 09 24 00
Manufacturer:
TexSton Industries, Inc.
8025 Deering Avenue
Canoga Park , CA 91304
8025 Deering Avenue
Canoga Park , CA 91304
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
No information available for this category
2.2 SUSTAINABLE PERFORMANCE CRITERIA
No information available for this category
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.3.1 Composition
| List the primary materials in a representative sample of the reported product. (List actual material - not trade name) | |||||||
|
Sand - up to 57%
|
|||||||
2.3.2 Toxicity
| Does the product contain any California Proposition 65 chemicals? | Yes No | |
| Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List? | Yes No | |
| Is the MSDS and/or a list of toxics available on company website? | Yes No |
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
| Has this product, or any product in the product category, gone through a life cycle assessment (LCA)? | Yes No | ||||||||
Manufacturer Comments
No information available for this category
3.2 Material Extraction and Transportation
3.2.2 Supply Chain
| What approximate percent of materials and/or assemblies by weight are sourced from ISO 14001 certified suppliers? | |||||||
|
don't know
|
|||||||
3.3 MANUFACTURING
3.3.1 Manufacturing and Support Facilities
| Does the company maintain ISO 14001 registration for some or all manufacturing facilities, including international locations? | |||||||||
|
none
|
|||||||||
| Does the company generate energy on-site from renewable resources? | Yes No | ||||||||
| Does the company purchase any thermal energy or electricity from renewable sources? (for electricity this refers to sources that meet the Center for Resource Solutions Green-e Energy National Standard) | Yes No | ||||||||
3.3.2 Manufacturing Process
| Does the company participate in any recognized voluntary programs to increase energy efficiency and/or reduce GHG emissions in manufacturing? | Yes No | ||||||||
| Does the company report greenhouse gas emissions? | Yes No | ||||||||
|
Is the company listed on The Climate Registry, and/or is GHG reporting done according to a recognized protocol?
|
|||||||||
3.4 CONSTRUCTION
3.4.1 Construction Waste Management
| Shipping and Packing Materials (select all that apply for each) | |||||||
|
Pallets:
Reusable
|
|||||||
|
Containers:
Recyclable
|
|||||||
3.4.2 Installation
| Accessories: Identify accessory items (adhesives, fasteners, tapes, etc.) required to install product and describe in the comment field any impact on the sustainable performance of the product. | |||||||
|
Primers
|
|||||||
3.4.3 Contract Closeout
| Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs? | Yes No | ||||||||
| Testing, Adjusting, and Commissioning: Briefly describe any activities recommended to assure optimal performance of the product or that are required to achieve its specified contribution to sustainable performance of the system. | |||||||||
|
TexSton primers are recommended for installation. In addition, TexSton sealers should be applied for stain resistance and as a water repellent. Contact TexSton for finishing recommendations.
|
|||||||||
3.5 FACILITY OPERATIONS
3.5.3 Manufacturer Comments
|
The surfaces are long lasting, and do not require periodic replacement. They are low maintenance and depending on the surface texture, can be cleaned with a damp cloth or brush using mild detergents. Exterior surfaces may require power washing. Most scratches, depending on surface texture, can be repaired by sanding and replacement is not generally necessary. If the surface is properly maintained, it can last the lifespan of the building.
|
3.6 DECONSTRUCTION / RECYCLING PHASE
3.6.2 Product Reuse
| Is the entire product reusable? | Yes No | ||||||||
| Are components of the product reusable? | Yes No | ||||||||
3.6.3 Product Recycling / Disposal
| Is the product currently being recycled into another product? | Yes No | ||||||||
3.6.4 Manufacturer Comments
|
The debris is non-toxic. It will not interfere with recycling of most substrates.
|
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
| Are any of the company's buildings/sites certified under a green building rating system? | Yes No | ||||||||
| Are there other environmental groups that also list the product(s)? | |||||||||
| Is this product GreenSpec listed? | Yes No | ||||||||
4.2 Transparency of Information
| Does the company have an environmental policy or sustainability plan available on its website? | Yes No | ||||||||
| Does the company produce a corporate sustainability report for public review? | Yes No | ||||||||
Manufacturer Comments
No information available for this category
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe