BACKGROUNDProduct image • Product description • Contact information
Description:
MEL-ROL LM is a single-component, polymer-modified, cold-applied, water-base, liquid waterproofing membrane ideal for below-grade vertical seamless waterproofing applications. We have taken the same high quality rubber polymers found in MEADOWS’ successful MEL-ROL “peel and stick” membrane, and converted them into a heavy-bodied, high solids, quick drying liquid membrane. With MEL-ROL LM, installation time is reduced, utilizing either a spray or roller application. A variety of different protection courses, insulation boards or drainage boards can be imbedded into the membrane to create a superior waterproofing system. With the application of PERMINATOR® vapor mat over the membrane, a composite system can be created that has the combined advantages of both “peel and stick” and fluid-applied membranes
MasterFormat Number(s): 07 14 16
MasterFormat Number(s): 07 14 16
Manufacturer:
W. R. MEADOWS
P.O. Box 338
300 Industrial Dr.
Hampshire, IL 60140-0338
P.O. Box 338
300 Industrial Dr.
Hampshire, IL 60140-0338
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
No information available for this category
2.2 SUSTAINABLE PERFORMANCE CRITERIA
2.2.08 Openings
| Are the values provided from testing by NFRC? | Yes No | ||||||||
2.2.99 Additional Product Performance
| List essential performance and physical characteristics: (ie. Fire resistance rating, vapor permeability, strength, etc.) | |||||||
|
Characteristic:
Elongation
|
Measurement test (UL, ASTM, FM, etc):
ASTM D 412
|
Results (value,units):
1500%
|
|||||
|
Characteristic:
Vapor Permeability
|
Measurement test (UL, ASTM, FM, etc):
ASTM E 96
|
Results (value,units):
0.03 PERMS
|
|||||
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.3.1 Composition
| List the primary materials in a representative sample of the reported product. (List actual material - not trade name) | |||||||
|
Content is Proprietary.
|
|||||||
2.3.2 Toxicity
| Does the product contain any California Proposition 65 chemicals? | Yes No | |
| Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List? | Yes No | |
| Is the MSDS and/or a list of toxics available on company website? | Yes No |
2.3.3 Recycled Content
| Does the product contain any recycled content material? | Yes No | ||||||||
2.3.6 Emissions
| For wet-applied products, what is the VOC content? | |||||||||
|
0 g/l |
Measurement Standard:
EPA Reference Test Method 24
|
||||||||
| Will adding the recommended pigments increase VOCs beyond what is stated? | Yes No | ||||||||
| Does the product contain any added Urea Formaldehyde? | Yes No | ||||||||
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
| Has this product, or any product in the product category, gone through a life cycle assessment (LCA)? | Yes No | ||||||||
| Is there other relevant LCA data, for example, pertaining to a major constituent material? (In some cases a trade association or other entity may have conducted an industry average LCA on a common material. Please note if this is the case, and also if there are ways in which the process used for this product significantly deviates from that generic LCA.) | Yes No | ||||||||
| Is an Environmental Product Declaration (EPD) available for this product, or any products in this category? (An Environmental Product Declaration (EPD) provides Life Cycle Information in a standardized format as described generally by ISO 14025, and specifically for building products by ISO 21930.) | Yes No | ||||||||
| Was the EPD third party verified? | |||||||||
Manufacturer Comments
|
3.1 Not Applicable to this product.
|
3.2 Material Extraction and Transportation
3.2.1 Regional Materials
| Location(s) of manufacturing facility(s) producing the reported product | |||||||||
|
City, State/Province, Zip, Country:
Hampshire, IL 60140
|
City, State/Province, Zip, Country:
|
||||||||
|
City, State/Province, Zip, Country:
|
|||||||||
| Raw materials or components are too numerous, are sourced from too wide a region, or are too dispersed for a meaningful answer. | Yes No | ||||||||
3.2.2 Supply Chain
| What approximate percent of materials and/or assemblies by weight are sourced from ISO 14001 certified suppliers? | |||||||
|
don't know
|
|||||||
| How has the company worked with suppliers on reducing the environmental footprint of your supply chain? | |||||||
|
Choose local Raw Material sources when available.
|
|||||||
Manufacturer Comments
|
Raw Material Source locations are dependent on manufacturing location. Please contact W. R. MEADOWS to verify LEED Credit contribution.
|
3.3 MANUFACTURING
3.3.1 Manufacturing and Support Facilities
| Does the company maintain ISO 14001 registration for some or all manufacturing facilities, including international locations? | |||||||
|
none
|
|||||||
3.3.2 Manufacturing Process
| Are any Hazardous Air Pollutants (as defined by EPA) created, used, or released during the manufacture of the product? | Yes No | ||||||||
|
Are any hazardous chemicals created, used, or released during the manufacture of the product which must be reported under the State Right to Know Act (SARA), Section 313 via the Toxics Release Inventory (TRI)? (The absence of hazardous chemicals or air pollutants in manufacture is laudable. However the presence of such hazards is not a simple indicator of environmental impact. Which listed hazards are present, how they are handled, the magnitude of emissions, and the extent and effectiveness of efforts to minimize creation, use, and releases of such hazards, are all important in assessing environmental responsibility. While it can be problematic to try to compare the performance of different companies, a record of TRI releases by company found on the EPA website allows review of a single company over time. http://www.epa.gov/enviro/html/tris/tris_query.html) |
Yes No | ||||||||
3.4 CONSTRUCTION
3.4.1 Construction Waste Management
| Shipping and Packing Materials (select all that apply for each) | |||||||
|
Pallets:
Recyclable
|
Boxes:
Recyclable
|
Packing filler:
Not used
|
|||||
|
Containers:
Recyclable
|
Wrapping:
Not used
|
Other:
Cardboard Cores
|
|||||
3.4.2 Installation
| Accessories: Identify accessory items (adhesives, fasteners, tapes, etc.) required to install product and describe in the comment field any impact on the sustainable performance of the product. | |||||||
|
MEL-PRIME™ Primer by W. R. MEADOWS DETAIL STRIP™ by W. R. MEADOWS CATALYTIC BONDING ASPHALT by W.R. MEADOWS.
MEL-DRAIN™ by W.R. MEADOWS PROTECTION COURSE by W. R. MEADOWS. TERMINATION BAR by W. R. MEADOWS.
|
|||||||
3.4.3 Contract Closeout
| Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs? | Yes No | ||||||||
3.4.4 Manufacturer Comments
|
3.4.3 Not Applicable to this product.
|
3.5 FACILITY OPERATIONS
3.5.1 Product Lifespan
| What is the expected lifespan of the product? | |||||||||
|
30+ years |
|||||||||
| What is the maximum length of manufacturer's warranty? | |||||||||
|
Varies - Application Specific
|
|||||||||
| Does the product have an extended life, based on improved durability as defined by ISO 14021? | Yes No | ||||||||
3.5.3 Manufacturer Comments
|
3.5.2 Not Applicable to this product.
|
3.6 DECONSTRUCTION / RECYCLING PHASE
3.6.1 Manufacturer/Industry Programs
| Is there a maintenance/replacement agreement? | Yes No | ||||||||
| Is there a buy-back or take-back program for products at end-of-life? | Yes No | ||||||||
| If yes, is there a cost to the customer? | |||||||||
3.6.4 Manufacturer Comments
|
3.6.1-3.6.3 Not Applicable to this product.
|
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
| Are any of the company's buildings/sites certified under a green building rating system? | Yes No | ||||||||
| Briefly describe the organizations environmental policies or programs and provide link to them on company website. | |||||||||
|
-Pollution Prevention Plans
|
|||||||||
| Are there other environmental groups that also list the product(s)? | |||||||||
|
N/A
|
Is this product GreenSpec listed? | Yes No | |||||||
| Please describe what Design-for-Environment (DfE) strategies were used in design of this product (including such practices as dematerialization, and design-for-disassembly), company-wide approach to DfE, and other aspects that you feel exemplify commitment but have not been quantified elsewhere in this form. | |||||||||
|
Research and Development is on-going; to provide "0"-low VOC products to the concrete construction industry.
|
|||||||||
4.2 Transparency of Information
| Is the environmental information reported in this form available on the website? | Yes No | ||||||||
| Does the company have an environmental policy or sustainability plan available on its website? | Yes No | ||||||||
| Does the company produce a corporate sustainability report for public review? | Yes No | ||||||||
| Ingredients or materials that comprise the product are fully disclosed on product packaging or in materials accompanying the product | Yes No | ||||||||
Manufacturer Comments
No information available for this category
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe