BACKGROUNDProduct image • Product description • Contact information
Description:
The CM 100 System is a recycled Hi Impact Polystyrene permanent form used in creating a 32 percent porous parking surface with concrete.
Model or ID numbers: CM-100
MasterFormat Number(s): 32 05 23, 03 11 13, 03 11 13
Model or ID numbers: CM-100
MasterFormat Number(s): 32 05 23, 03 11 13, 03 11 13
Manufacturer:
Green Innovations
3700 Salem Rd.
Pickering, ON L1Y 1E8
3700 Salem Rd.
Pickering, ON L1Y 1E8
Distribution Channels:
- Distributor(/Representative)
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
Manufacturer Comments
| The CM-100 system is made from 100 percent recycled material. It aloows the designer to specify significantly less concrete and creates a stormwater drainage system to help prevent runoff. |
2.2 SUSTAINABLE PERFORMANCE CRITERIA
No information available for this category
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.3.1 Composition
| List the primary materials in a representative sample of the reported product. (List actual material - not trade name) | |||||||
|
100 percent recycled HIPS
|
|||||||
2.3.2 Toxicity
| Does the product contain any California Proposition 65 chemicals? | Yes No | |
| Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List? | Yes No | |
| Is the MSDS and/or a list of toxics available on company website? | Yes No |
2.3.3 Recycled Content
| Does the product contain any recycled content material? | Yes No | ||||||||
|
Post-Consumer: Percent by weight of total product: 25 range |
Post-Consumer: Description of post-consumer content: HIPS
|
||||||||
|
Pre-Consumer: Percent by weight of total product: 75 range |
Pre-Consumer: Description of pre-consumer content: HIPS
|
Total: Percent by weight of total product: 100 |
|||||||
| If yes, are these measurements certified? | Yes No | ||||||||
2.3.6 Emissions
| Does the product contain any added Urea Formaldehyde? | Yes No | ||||||||
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
| Has this product, or any product in the product category, gone through a life cycle assessment (LCA)? | Yes No | ||||||||
| Is there other relevant LCA data, for example, pertaining to a major constituent material? (In some cases a trade association or other entity may have conducted an industry average LCA on a common material. Please note if this is the case, and also if there are ways in which the process used for this product significantly deviates from that generic LCA.) | Yes No | ||||||||
| Is an Environmental Product Declaration (EPD) available for this product, or any products in this category? (An Environmental Product Declaration (EPD) provides Life Cycle Information in a standardized format as described generally by ISO 14025, and specifically for building products by ISO 21930.) | Yes No | ||||||||
| Was the EPD third party verified? | |||||||||
Manufacturer Comments
No information available for this category
3.2 Material Extraction and Transportation
3.2.1 Regional Materials
| Location(s) of manufacturing facility(s) producing the reported product | |||||||
|
City, State/Province, Zip, Country:
USA
|
|||||||
3.3 MANUFACTURING
3.3.1 Manufacturing and Support Facilities
| Does the company maintain ISO 14001 registration for some or all manufacturing facilities, including international locations? | |||||||||
|
none
|
|||||||||
| Does the company generate energy on-site from renewable resources? | Yes No | ||||||||
| Does the company purchase any thermal energy or electricity from renewable sources? (for electricity this refers to sources that meet the Center for Resource Solutions Green-e Energy National Standard) | Yes No | ||||||||
3.3.2 Manufacturing Process
| Does the company participate in any recognized voluntary programs to increase energy efficiency and/or reduce GHG emissions in manufacturing? | Yes No | ||||||||
| Does the company report greenhouse gas emissions? | Yes No | ||||||||
| Are any Hazardous Air Pollutants (as defined by EPA) created, used, or released during the manufacture of the product? | Yes No | ||||||||
|
Are any hazardous chemicals created, used, or released during the manufacture of the product which must be reported under the State Right to Know Act (SARA), Section 313 via the Toxics Release Inventory (TRI)? (The absence of hazardous chemicals or air pollutants in manufacture is laudable. However the presence of such hazards is not a simple indicator of environmental impact. Which listed hazards are present, how they are handled, the magnitude of emissions, and the extent and effectiveness of efforts to minimize creation, use, and releases of such hazards, are all important in assessing environmental responsibility. While it can be problematic to try to compare the performance of different companies, a record of TRI releases by company found on the EPA website allows review of a single company over time. http://www.epa.gov/enviro/html/tris/tris_query.html) |
Yes No | ||||||||
3.4 CONSTRUCTION
3.4.1 Construction Waste Management
| Has the company reduced the amount of packaging required? | Yes No | ||||||||
| Are there programs in place to reduce environmental impacts of packaging? | Yes No | ||||||||
| Does the design of this product include features that reduce amount of excess material/overage required at installation? | Yes No | ||||||||
3.4.3 Contract Closeout
| Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs? | Yes No | ||||||||
3.5 FACILITY OPERATIONS
3.5.1 Product Lifespan
| What is the expected lifespan of the product? | |||||||||
|
100 years |
|||||||||
| Does the product have an extended life, based on improved durability as defined by ISO 14021? | Yes No | ||||||||
3.6 DECONSTRUCTION / RECYCLING PHASE
3.6.1 Manufacturer/Industry Programs
| Is there a maintenance/replacement agreement? | Yes No | ||||||||
| Is there a buy-back or take-back program for products at end-of-life? | Yes No | ||||||||
| If yes, is there a cost to the customer? | |||||||||
3.6.2 Product Reuse
| Is the entire product reusable? | Yes No | ||||||||
| Are components of the product reusable? | Yes No | ||||||||
3.6.3 Product Recycling / Disposal
| Is the product currently being recycled into another product? | Yes No | ||||||||
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
| Are any of the company's buildings/sites certified under a green building rating system? | Yes No | ||||||||
| Does the company participate in any voluntary programs to reduce environmental impact of the listed product(s)? | Yes No | ||||||||
4.2 Transparency of Information
| Is the environmental information reported in this form available on the website? | Yes No | ||||||||
| Does the company have an environmental policy or sustainability plan available on its website? | Yes No | ||||||||
| Does the company produce a corporate sustainability report for public review? | Yes No | ||||||||
| Ingredients or materials that comprise the product are fully disclosed on product packaging or in materials accompanying the product | Yes No | ||||||||
Manufacturer Comments
No information available for this category
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe