Series 3000 Aluminum Plate Panel System
- Firestone Metal Products
- manufacturer details and additional products (8) »
BACKGROUNDProduct image • Product description • Contact information
Description:
Series 3000 Aluminum Plate wall panel system is designed with formed panel return flanges and welded corners. The system utilizes standard mechanically attached clips or the UNA-CLIP (requiring no field drilling or fitting).
The UNA-CLIP snaps into place quickly, for unpresidented time savings during installation. The preengineered and prelocated slots mean less errors during installation. Panels are installed right the first time, eliminating unnecessary steps and greatly improving labor time. The accurate placing of the clips better accomodates thermal movement.
MasterFormat Number(s): 07 42 00
MasterFormat Number(s): 07 42 00
Manufacturer:
Firestone Metal Products
1001 Lund Boulevard
Anoka, MN 55303
1001 Lund Boulevard
Anoka, MN 55303
Distribution Channels:
- Manufacturer-direct
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
No information available for this category
2.2 SUSTAINABLE PERFORMANCE CRITERIA
2.2.07 Thermal and Moisture Protection
| Is the product Cool Roof Rating Council listed with performance claims from the CRRC rating? | Yes No | ||||||||
2.2.08 Openings
| Are the values provided from testing by NFRC? | Yes No | ||||||||
Manufacturer Comments
|
Panel system tested for Miami-Dade NOA compliance; ASTM 283, ASTM 330 & ASTM 331.
|
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.3.1 Composition
| List the primary materials in a representative sample of the reported product. (List actual material - not trade name) | |||||||
|
3003-H14 Aluminum
|
|||||||
2.3.2 Toxicity
| Does the product contain any California Proposition 65 chemicals? | Yes No | |
| Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List? | Yes No | |
| Is the MSDS and/or a list of toxics available on company website? | Yes No |
2.3.3 Recycled Content
| Does the product contain any recycled content material? | Yes No | ||||||||
|
Post-Consumer: Percent by weight of total product: 13 range |
Post-Consumer: Description of post-consumer content: Consumer
|
||||||||
|
Pre-Consumer: Percent by weight of total product: 36 range |
Pre-Consumer: Description of pre-consumer content: Industrial
|
Total: Percent by weight of total product: 32 |
|||||||
|
Total: Measurement definition: ""
|
|||||||||
| If yes, are these measurements certified? | Yes No | ||||||||
Reused Materials Manufacturer Comments
|
The product is made of aluminum which may be melted down into another product or which may be refabricated into panels for another building.
|
2.3.6 Emissions
| Does the product contain any added Urea Formaldehyde? | Yes No | ||||||||
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
| Has this product, or any product in the product category, gone through a life cycle assessment (LCA)? | Yes No | ||||||||
| Was the LCA third-party verified? | Yes No | ||||||||
| Is there other relevant LCA data, for example, pertaining to a major constituent material? (In some cases a trade association or other entity may have conducted an industry average LCA on a common material. Please note if this is the case, and also if there are ways in which the process used for this product significantly deviates from that generic LCA.) | Yes No | ||||||||
| Is an Environmental Product Declaration (EPD) available for this product, or any products in this category? (An Environmental Product Declaration (EPD) provides Life Cycle Information in a standardized format as described generally by ISO 14025, and specifically for building products by ISO 21930.) | Yes No | ||||||||
| Was the EPD third party verified? | Yes No | ||||||||
Manufacturer Comments
No information available for this category
3.2 Material Extraction and Transportation
3.2.1 Regional Materials
| Location(s) of manufacturing facility(s) producing the reported product | |||||||||
|
City, State/Province, Zip, Country:
Anoka, MN
|
City, State/Province, Zip, Country:
Reno, NV
|
||||||||
|
City, State/Province, Zip, Country:
Warren, MI
|
|||||||||
| List Primary Raw Materials in Product: (ie. sand, cement, water, recycled glass, clay, wood, biofiber, etc.): (If a significant percent of the raw materials for this product (excluding water) are sourced from a specific location, please also list percent by weight of material in the product and material source location (town, state, country zip code, country). Be as specific as possible regarding each raw material in the product, but leave the location blank if the material is sourced from many different locations.) | |||||||||
|
Material:
Aluminum
|
Location:
Texarkana, TX
|
Percent by weight:
90 |
|||||||
| Raw materials or components are too numerous, are sourced from too wide a region, or are too dispersed for a meaningful answer. | Yes No | ||||||||
3.3 MANUFACTURING
3.3.1 Manufacturing and Support Facilities
| Does the company generate energy on-site from renewable resources? | Yes No | ||||||||
| Does the company purchase any thermal energy or electricity from renewable sources? (for electricity this refers to sources that meet the Center for Resource Solutions Green-e Energy National Standard) | Yes No | ||||||||
3.3.2 Manufacturing Process
| Are any Hazardous Air Pollutants (as defined by EPA) created, used, or released during the manufacture of the product? | Yes No | ||||||||
|
Are any hazardous chemicals created, used, or released during the manufacture of the product which must be reported under the State Right to Know Act (SARA), Section 313 via the Toxics Release Inventory (TRI)? (The absence of hazardous chemicals or air pollutants in manufacture is laudable. However the presence of such hazards is not a simple indicator of environmental impact. Which listed hazards are present, how they are handled, the magnitude of emissions, and the extent and effectiveness of efforts to minimize creation, use, and releases of such hazards, are all important in assessing environmental responsibility. While it can be problematic to try to compare the performance of different companies, a record of TRI releases by company found on the EPA website allows review of a single company over time. http://www.epa.gov/enviro/html/tris/tris_query.html) |
Yes No | ||||||||
3.4 CONSTRUCTION
3.4.1 Construction Waste Management
| Shipping and Packing Materials (select all that apply for each) | |||||||||
|
Pallets:
Reusable
|
Boxes:
Not used
|
Packing filler:
Recyclable
|
|||||||
|
Containers:
Recyclable
|
Wrapping:
Minimized
|
||||||||
| Has the company reduced the amount of packaging required? | Yes No | ||||||||
| Are there programs in place to reduce environmental impacts of packaging? | Yes No | ||||||||
| Does the design of this product include features that reduce amount of excess material/overage required at installation? | Yes No | ||||||||
3.4.3 Contract Closeout
| Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs? | Yes No | ||||||||
3.5 FACILITY OPERATIONS
3.5.1 Product Lifespan
| What is the expected lifespan of the product? | |||||||||
|
100 years |
|||||||||
| What is the maximum length of manufacturer's warranty? | |||||||||
|
20
|
|||||||||
| Does the product have an extended life, based on improved durability as defined by ISO 14021? | Yes No | ||||||||
3.5.2 Recommended Cleaning and Maintenance
| Recommended frequency of regularly scheduled cleaning | |||||||||
|
Other
|
|||||||||
| Exterior Products: Do recommended cleaning materials meet requirements of SCAQMD air and water quality standards and regulations? | Yes No | ||||||||
3.6 DECONSTRUCTION / RECYCLING PHASE
3.6.1 Manufacturer/Industry Programs
| Is there a maintenance/replacement agreement? | Yes No | ||||||||
| Is there a buy-back or take-back program for products at end-of-life? | Yes No | ||||||||
| If yes, is there a cost to the customer? | |||||||||
3.6.2 Product Reuse
| Is the entire product reusable? | Yes No | ||||||||
| Are components of the product reusable? | Yes No | ||||||||
| If yes to either of the above, do installation techniques allow it to be easily removed/disassembled without damage? | Yes No | ||||||||
3.6.3 Product Recycling / Disposal
| Is the product currently being recycled into another product? | Yes No | ||||||||
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
| Are any of the company's buildings/sites certified under a green building rating system? | Yes No | ||||||||
| Are there other environmental groups that also list the product(s)? | |||||||||
| Is this product GreenSpec listed? | Yes No | ||||||||
| Does the company participate in any voluntary programs to reduce environmental impact of the listed product(s)? | Yes No | ||||||||
4.2 Transparency of Information
No information available for this category
Manufacturer Comments
No information available for this category
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe