BACKGROUNDProduct image • Product description • Contact information
Description:
Ecophon Gedina by CertainTeed Ceilings are high-performance fiberglass ceiling panels in standard edge details (square, reveal). Gedina offers a long list of technical superlatives: very high sound absorption, certified low VOC emission, certified low particle emission and the highest post-consumer recycled content value available in North America.
MasterFormat Number(s): 09 51 00
MasterFormat Number(s): 09 51 00
Manufacturer:
CertainTeed Ceilings
P.O. Box 860
Valley Forge, PA 19482
P.O. Box 860
Valley Forge, PA 19482
Distribution Channels:
- Manufacturer-direct
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
2.1.3 Third Party Certification - Indoor Emissions
| CERTIFICATION NAME | Certifying Organization | Level | Certification Number | Activation Date | Length of Term |
| CHPS / CA 01350 | Berkeley Analytical Assoc | -- | -- | 2007-04-02 | -- |
2.1.4 Third Party Certification - Other Certification Categories
| CERTIFICATION NAME | Certifying Organization | Level | Certification Number | Activation Date | Length of Term |
| Other | Danish Indoor Climate Lbl | Certificate 001 | -- | 2008-05-01 | 60 months |
2.1.5 Second Party Certification Program - Whole Product Sustainability
| CERTIFICATION NAME | Certifying Organization | Level | Certification Number | Activation Date | Testing Organization* | Length of Term |
| Nordic Swan (Scandinavia) | -- | -- | 310007.14 | 2003-03-19 | -- | 84 months |
Manufacturer Comments
| This product also is classified by RTS - Building Information Foundation(Finland) with emission class M1 (highest class). Additionally, this product is recommended by the Swedish Asthma & Allergy Association and is essentially particle-free as this panel is laboratory certified as an acceptable component in clean room design (ISO class 6/M3.5). |
2.2 SUSTAINABLE PERFORMANCE CRITERIA
2.2.09 Finishes
| Noise Reduction Coefficient (NRC) | |||||||
|
Test Standard:
ASTM C 423
|
Results:
.85
|
||||||
| Sound Transmission Class (STC) | |||||||
|
Test Standard:
ASTM E 1414
|
Results:
19-21(CAC)
|
||||||
2.2.99 Additional Product Performance
| List essential performance and physical characteristics: (ie. Fire resistance rating, vapor permeability, strength, etc.) | |||||||
|
Characteristic:
Surface Burning
|
Measurement test (UL, ASTM, FM, etc):
ASTM E 84
|
Results (value,units):
Class A / flame spread: 25; smoke developed: 10
|
|||||
|
Characteristic:
Classification of Sound Absorber
|
Measurement test (UL, ASTM, FM, etc):
ISO 11654
|
Results (value,units):
Class A absorber
|
|||||
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.3.1 Composition
| List the primary materials in a representative sample of the reported product. (List actual material - not trade name) | |||||||
|
Fibrous glass wool
|
|||||||
2.3.2 Toxicity
| Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List? | Yes No | |
| Is the MSDS and/or a list of toxics available on company website? | Yes No |
2.3.3 Recycled Content
| Does the product contain any recycled content material? | Yes No | ||||||||
|
Post-Consumer: Percent by weight of total product: 72 range |
Post-Consumer: Description of post-consumer content: recycled household glass bottles, jars
|
||||||||
|
Pre-Consumer: Percent by weight of total product: 5 range |
Pre-Consumer: Description of pre-consumer content: industrial glass
|
Total: Percent by weight of total product: 77 |
|||||||
| If yes, are these measurements certified? | Yes No | ||||||||
|
Certifying Organization:
Nordic Swan Eco-label
|
Certification Number:
31007.14
|
||||||||
|
Certification Date:
2003-03-19 |
Certification Term:
84 months |
||||||||
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
No information available for this category
Manufacturer Comments
No information available for this category
3.2 Material Extraction and Transportation
3.2.1 Regional Materials
| List Primary Raw Materials in Product: (ie. sand, cement, water, recycled glass, clay, wood, biofiber, etc.): (If a significant percent of the raw materials for this product (excluding water) are sourced from a specific location, please also list percent by weight of material in the product and material source location (town, state, country zip code, country). Be as specific as possible regarding each raw material in the product, but leave the location blank if the material is sourced from many different locations.) | |||||||||
|
Material:
Household glass
|
Location:
Sweden
|
Percent by weight:
95 |
|||||||
| Raw materials or components are too numerous, are sourced from too wide a region, or are too dispersed for a meaningful answer. | Yes No | ||||||||
3.3 MANUFACTURING
No information available for this category
3.4 CONSTRUCTION
3.4.3 Contract Closeout
| Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs? | Yes No | ||||||||
3.5 FACILITY OPERATIONS
3.5.1 Product Lifespan
| What is the maximum length of manufacturer's warranty? | |||||||
|
15 years
|
|||||||
3.6 DECONSTRUCTION / RECYCLING PHASE
No information available for this category
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
| Are any of the company's buildings/sites certified under a green building rating system? | Yes No | ||||||||
4.2 Transparency of Information
No information available for this category
Manufacturer Comments
No information available for this category
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe