BACKGROUNDProduct image • Product description • Contact information
Description:
-The adhered fabric blocks mortar or stucco from filling the drainage channels and acts as a bug screen at terminations
-It has superior appearance on thin veneers vs. furring strips due to less ridging, cracking, and waviness
-It saves installation time (half the time of furring strips and backer board)
-High impact polystyrene ensures durability, rigidity, and longevity
-Vertical channels promote rapid drainage
-Perforations allow cross-ventilation for better drying
-Compartmentalized channels promote pressure equalization
-It prevents bridging
-Exceeds ASTM E-2273
UV Tested - Over 9 Weeks
Model or ID numbers: SC 5016, SC 5023
MasterFormat Number(s): 04 05 23, 07 05 00, 04 05 23.19
Model or ID numbers: SC 5016, SC 5023
MasterFormat Number(s): 04 05 23, 07 05 00, 04 05 23.19
Manufacturer:
Masonry Technology Inc.
24235 Electric Street
Cresco, IA 52136
24235 Electric Street
Cresco, IA 52136
Distribution Channels:
- Manufacturer-direct
- Distributor(/Representative)
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
No information available for this category
2.2 SUSTAINABLE PERFORMANCE CRITERIA
2.2.99 Additional Product Performance
| List essential performance and physical characteristics: (ie. Fire resistance rating, vapor permeability, strength, etc.) | |||||||
|
Characteristic:
Drainange Efficiency
|
Measurement test (UL, ASTM, FM, etc):
ASTM E-2273
|
Results (value,units):
97.5% Water Removed
|
|||||
|
Characteristic:
UV Resistance
|
Measurement test (UL, ASTM, FM, etc):
ICC AC48, ICC EG356
|
Results (value,units):
9 weeks/630 light hours - No Deterioration
|
|||||
|
Characteristic:
Fungal Resistance
|
Measurement test (UL, ASTM, FM, etc):
ASTM C 1338
|
Results (value,units):
ANiger, AVersicolor, AFlavus, CGlobosum, PPinophil
|
|||||
|
Characteristic:
Mean Compressive Strength
|
Results (value,units):
127 kPa
|
||||||
|
Characteristic:
Water Vapor Transmission
|
Measurement test (UL, ASTM, FM, etc):
ASTM E96-05
|
Results (value,units):
WVT 9.6, Permeance, 23.45, Permeability 8.79
|
|||||
Manufacturer Comments
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.3.1 Composition
| List the primary materials in a representative sample of the reported product. (List actual material - not trade name) | |||||||
|
96% Post-Industrial High Impact Polystyrene (by weight)
|
|||||||
Composition Manufacturer Comments
|
Pace Polystyrnene HIPSAEX manufactured by Pace Industries, Inc.
|
2.3.2 Toxicity
| Is the MSDS and/or a list of toxics available on company website? | Yes No |
Toxicity Manufacturer Comments
|
No more than 0.1% by weight of any POPs Source Materials, VHHCs, HHCs or Highly Acute Toxicants.
|
2.3.3 Recycled Content
| Does the product contain any recycled content material? | Yes No | ||||||||
|
Pre-Consumer: Percent by weight of total product: 96 range |
Pre-Consumer: Description of pre-consumer content: Post Industrial Polystyrene
|
Total: Percent by weight of total product: 96 |
|||||||
|
Total: Measurement definition: ""
|
|||||||||
Recycled Content Manufacturer Comments
|
Minimal Production Waste (less than 0.5%).
|
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
No information available for this category
Manufacturer Comments
No information available for this category
3.2 Material Extraction and Transportation
3.2.1 Regional Materials
| Location(s) of manufacturing facility(s) producing the reported product | |||||||
|
City, State/Province, Zip, Country:
Cresco, IA, 52136, USA
|
|||||||
| List Primary Raw Materials in Product: (ie. sand, cement, water, recycled glass, clay, wood, biofiber, etc.): (If a significant percent of the raw materials for this product (excluding water) are sourced from a specific location, please also list percent by weight of material in the product and material source location (town, state, country zip code, country). Be as specific as possible regarding each raw material in the product, but leave the location blank if the material is sourced from many different locations.) | |||||||
|
Material:
High Impact Polystyrene
|
Location:
Wisconsin, USA
|
Percent by weight:
96 |
|||||
|
Material:
Polypropelene Fabric
|
Location:
Tennesse, USA
|
Percent by weight:
4 |
|||||
3.3 MANUFACTURING
3.3.1 Manufacturing and Support Facilities
| Does the company maintain ISO 14001 registration for some or all manufacturing facilities, including international locations? | |||||||||
|
all
|
|||||||||
| Does the company generate energy on-site from renewable resources? | Yes No | ||||||||
3.3.2 Manufacturing Process
| What is the company's specified goal for reducing potable water use? | |||||||
|
What steps have been taken to reduce potable water consumption of the manufacturing process?
No potable water is used in manufacturing process.
|
|||||||
| What is the company's specified goal for reducing solid waste? | |||||||
|
What steps has the company taken to reduce solid-waste created from the manufacturing process?
Reusing cardboard and pallets received with raw materials shipments
|
|||||||
| What percent of the waste from the facility goes to hazardous waste, landfill, Waste-To-Energy (WTE), recycled (offsite)? | |||||||
|
hazardous waste:
0 |
|||||||
3.4 CONSTRUCTION
3.4.1 Construction Waste Management
| Shipping and Packing Materials (select all that apply for each) | |||||||||
|
Pallets:
Minimized,Reusable,Recyclable,Compostable
|
Boxes:
Minimized,Reusable,Recyclable,Compostable
|
Packing filler:
Not used
|
|||||||
|
Containers:
Not used
|
Wrapping:
Minimized
|
||||||||
| Has the company reduced the amount of packaging required? | Yes No | ||||||||
| Are there programs in place to reduce environmental impacts of packaging? | Yes No | ||||||||
| Does the design of this product include features that reduce amount of excess material/overage required at installation? | Yes No | ||||||||
3.4.3 Contract Closeout
| Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs? | Yes No | ||||||||
| Testing, Adjusting, and Commissioning: Briefly describe any activities recommended to assure optimal performance of the product or that are required to achieve its specified contribution to sustainable performance of the system. | |||||||||
|
No final cleaning necessary.
|
|||||||||
3.5 FACILITY OPERATIONS
3.5.1 Product Lifespan
| What is the expected lifespan of the product? | |||||||
|
50 years |
|||||||
| What is the maximum length of manufacturer's warranty? | |||||||
|
20
|
|||||||
3.6 DECONSTRUCTION / RECYCLING PHASE
3.6.1 Manufacturer/Industry Programs
| Is there a maintenance/replacement agreement? | Yes No | ||||||||
| Is there a buy-back or take-back program for products at end-of-life? | Yes No | ||||||||
| If yes, is there a cost to the customer? | |||||||||
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
No information available for this category
4.2 Transparency of Information
| Is the environmental information reported in this form available on the website? | Yes No | ||||||||
|
If yes link to webpage(s):
http://www.mtidry.com/about/environment.php
|
|||||||||
Manufacturer Comments
No information available for this category
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe