Parking bumper/wheel stop
- RubberForm Recycled Products LLC
- manufacturer details and additional products (0) »
BACKGROUNDProduct image • Product description • Contact information
Description:
The RubberForm Parking Lot Wheel Stop - Parking Curb helps ensure vehicles stop at the proper location when parking – preventing damage to buildings, sidewalks, curbs and delicate landscape. Inside, they function as bumper cushions and protection for motorized carts, forklift trucks and vehicles operating in factories and warehouses. Ideal for retail/commercial/business parking lots, parking garages and municipalities, wheel stops provide needed order by delineating parking spots and ensuring proper distancing.
RubberForm's 100% recycled rubber wheel stops are a durable, reliable, long-lasting alternative to traditional concrete stops. Studies have shown that over a 10-year period, concrete wheel stops could cost six times more than recycled rubber models due to cracking/maintenance issues.
Less damaging to vehicles upon impact.
Flexible: conforms to any asphalt or concrete surface.
Temporary or permanent installation.
Includes 5 pre-drilled holes for easy lag bolt mooring.
RubberForm Parking Lot Wheel Stop/Parking Curb - Patent Pending
Resistant to extreme temperature variations, UV light, oils, moisture and damage.
All-weather easy maintenance: will not rust, chip, crack, crumble, corrode or need repainting.
Environmentally friendly: Made in the USA from durable recycled tire rubber.
Easy to install, easy to move by one person.
Model or ID numbers: RF-PWS38
MasterFormat Number(s): 32 17 13.23, 32 17 13
Model or ID numbers: RF-PWS38
MasterFormat Number(s): 32 17 13.23, 32 17 13
Manufacturer:
RubberForm Recycled Products LLC
75 Michigan Street
Lockport, NY 14094-2629
75 Michigan Street
Lockport, NY 14094-2629
Distribution Channels:
- Manufacturer-direct
- Distributor(/Representative)
- Wholesale
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
2.1.5 Second Party Certification Program - Whole Product Sustainability
| CERTIFICATION NAME | Certifying Organization | Level | Certification Number | Activation Date | Testing Organization* | Length of Term |
| Other | GreenSpec listed | Building Green | MR 4.1 4.2 | 2006-05-01 | -- | -- |
2.1.12 Self-Declaration of Compliance - Other Certification Categories
| CERTIFICATION NAME | Standards Organization/Agency | Standard Number | Testing Organization | Last Updated |
| EPA Comprehensive Procurement Guidelines (CPG) | EPA | -- | -- | 2006-05-01 |
2.2 SUSTAINABLE PERFORMANCE CRITERIA
No information available for this category
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.3.1 Composition
| List the primary materials in a representative sample of the reported product. (List actual material - not trade name) | |||||||
|
100% recyled rubber from scrap tires
|
|||||||
2.3.2 Toxicity
| Does the product contain any California Proposition 65 chemicals? | Yes No | |
| Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List? | Yes No |
2.3.3 Recycled Content
| Does the product contain any recycled content material? | |||||||
|
Post-Consumer: Percent by weight of total product: 100 range |
Post-Consumer: Description of post-consumer content: recycled scrap tires-crumb
|
||||||
2.3.6 Emissions
| Will adding the recommended pigments increase VOCs beyond what is stated? | Yes No | ||||||||
| Does the product contain any added Urea Formaldehyde? | Yes No | ||||||||
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
No information available for this category
Manufacturer Comments
|
New business in the process of testing however there are like products on the market that have been tested
|
3.2 Material Extraction and Transportation
3.2.1 Regional Materials
| Location(s) of manufacturing facility(s) producing the reported product | |||||||||
|
City, State/Province, Zip, Country:
Lockport NY 14094-2629 USA
|
|||||||||
| List Primary Raw Materials in Product: (ie. sand, cement, water, recycled glass, clay, wood, biofiber, etc.): (If a significant percent of the raw materials for this product (excluding water) are sourced from a specific location, please also list percent by weight of material in the product and material source location (town, state, country zip code, country). Be as specific as possible regarding each raw material in the product, but leave the location blank if the material is sourced from many different locations.) | |||||||||
|
Material:
Recycled Rubber
|
Percent by weight:
99 |
||||||||
| Raw materials or components are too numerous, are sourced from too wide a region, or are too dispersed for a meaningful answer. | Yes No | ||||||||
3.3 MANUFACTURING
3.3.1 Manufacturing and Support Facilities
| Does the company maintain ISO 14001 registration for some or all manufacturing facilities, including international locations? | |||||||||
|
none
|
|||||||||
| Does the company generate energy on-site from renewable resources? | Yes No | ||||||||
| Does the company purchase any thermal energy or electricity from renewable sources? (for electricity this refers to sources that meet the Center for Resource Solutions Green-e Energy National Standard) | Yes No | ||||||||
|
If yes, percent of purchased thermal or electrical energy from renewable energy sources:
100 for manufacturing plant |
If yes, percent of purchased thermal or electrical energy from renewable energy sources:
100 of total company purchase |
||||||||
3.3.2 Manufacturing Process
| What percent of the waste from the facility goes to hazardous waste, landfill, Waste-To-Energy (WTE), recycled (offsite)? | |||||||||
|
hazardous waste:
0 |
landfill:
0 |
Waste-To-Energy (WTE):
0 |
|||||||
|
recycled (offsite):
60 |
|||||||||
| Are any Hazardous Air Pollutants (as defined by EPA) created, used, or released during the manufacture of the product? | Yes No | ||||||||
|
Are any hazardous chemicals created, used, or released during the manufacture of the product which must be reported under the State Right to Know Act (SARA), Section 313 via the Toxics Release Inventory (TRI)? (The absence of hazardous chemicals or air pollutants in manufacture is laudable. However the presence of such hazards is not a simple indicator of environmental impact. Which listed hazards are present, how they are handled, the magnitude of emissions, and the extent and effectiveness of efforts to minimize creation, use, and releases of such hazards, are all important in assessing environmental responsibility. While it can be problematic to try to compare the performance of different companies, a record of TRI releases by company found on the EPA website allows review of a single company over time. http://www.epa.gov/enviro/html/tris/tris_query.html) |
Yes No | ||||||||
3.4 CONSTRUCTION
3.4.1 Construction Waste Management
| Shipping and Packing Materials (select all that apply for each) | |||||||||
|
Pallets:
Minimized
|
Boxes:
Minimized
|
Packing filler:
Not used
|
|||||||
|
Containers:
Not used
|
Wrapping:
Not used
|
||||||||
| Has the company reduced the amount of packaging required? | Yes No | ||||||||
3.4.3 Contract Closeout
| Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs? | Yes No | ||||||||
3.5 FACILITY OPERATIONS
No information available for this category
3.6 DECONSTRUCTION / RECYCLING PHASE
3.6.2 Product Reuse
| Is the entire product reusable? | Yes No | ||||||||
| Are components of the product reusable? | Yes No | ||||||||
| If yes to either of the above, do installation techniques allow it to be easily removed/disassembled without damage? | Yes No | ||||||||
3.6.3 Product Recycling / Disposal
| Is the product currently being recycled into another product? | Yes No | ||||||||
|
If yes, describe what new product(s):
recycle all scrap back to crumb
|
If yes, what % of annual production is recycled?
70 |
||||||||
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
| Are any of the company's buildings/sites certified under a green building rating system? | Yes No | ||||||||
| Briefly describe the organizations environmental policies or programs and provide link to them on company website. | |||||||||
|
We lease the building; when we purchase will update to include green materails and systems
|
|||||||||
| Are there other environmental groups that also list the product(s)? | |||||||||
| Is this product GreenSpec listed? | Yes No | ||||||||
4.2 Transparency of Information
| Ingredients or materials that comprise the product are fully disclosed on product packaging or in materials accompanying the product | Yes No | ||||||||
Manufacturer Comments
No information available for this category
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe