Sign Post Base/Stand
- RubberForm Recycled Products LLC
- manufacturer details and additional products (6) »
BACKGROUNDProduct image • Product description • Contact information
Description:
95% post consumer recycled rubber made into an atractive conical design that withstands high winds with a weight of 71 pounds and a low center of gravity. Semi-Permanent but portable with its easy tip and roll design. This base will not rust, chip or corrode. Holds 2-3/8" round plastic or aluminum pole or 1-3/4 " square steel pole. Available in Black or safety yellow. Recycled aluminum parking and traffic signs also available.
Supports any type of sign up to 24 inch in diameter including Handicapped parking, NO parking fire lane, stop, school crossing and more. Enhances safety and minimizes liability/damage in vehicle/pedestrian incidents.
Easy to install, easy to move for snow removal, maintenance or storage - just tip and roll.
The RubberForm Sign Post Base/Stand - lets your customers, employees and visitors know you not only care about their safety, but also the environment. RubberForm’s attractive and durable sign base is ideal for parking lots, parking garages, crosswalks, schools, shopping malls, grocery stores, plazas, universities, hospitals, airports, construction sites, government facilities and many more.
Use it anywhere portable or a semi-permanent signage is needed – such as entrances, crosswalks, intersections, corporate facilities, events, and more. Ideal for displaying signs where a post cannot be permanently mounted in the ground or where temporary signage is needed. Aerodynamic and heavy enough to stay upright, yet light enough to be tipped and rolled to another location.
Patent Pending
Model or ID numbers: RF-SGB70
MasterFormat Number(s): 34 41 13, 10 14 53
Model or ID numbers: RF-SGB70
MasterFormat Number(s): 34 41 13, 10 14 53
Manufacturer:
RubberForm Recycled Products LLC
75 Michigan Street
Lockport, NY 14094-2629
75 Michigan Street
Lockport, NY 14094-2629
Distribution Channels:
- Manufacturer-direct
- Distributor(/Representative)
- Wholesale
PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS
2.1.5 Second Party Certification Program - Whole Product Sustainability
| CERTIFICATION NAME | Certifying Organization | Level | Certification Number | Activation Date | Testing Organization* | Length of Term |
| Other | Building Green | GreenSpec Listed | MR 4.1 4.2 | 2006-05-01 | -- | -- |
2.1.12 Self-Declaration of Compliance - Other Certification Categories
| CERTIFICATION NAME | Standards Organization/Agency | Standard Number | Testing Organization | Last Updated |
| EPA Comprehensive Procurement Guidelines (CPG) | EPA | -- | -- | 2006-05-01 |
2.2 SUSTAINABLE PERFORMANCE CRITERIA
No information available for this category
2.3 SUSTAINABLE COMPOSITION OF PRODUCT
2.3.1 Composition
| List the primary materials in a representative sample of the reported product. (List actual material - not trade name) | |||||||
|
95% POST CONSUMER RECYCLED TIRE RUBBER
|
|||||||
2.3.2 Toxicity
| Does the product contain any California Proposition 65 chemicals? | Yes No | |
| Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List? | Yes No |
2.3.3 Recycled Content
| Does the product contain any recycled content material? | Yes No | ||||||||
|
Post-Consumer: Percent by weight of total product: 95 range |
Post-Consumer: Description of post-consumer content: recycled scrap tires-crumb
|
||||||||
|
Total: Percent by weight of total product: 95 |
|||||||||
Recycled Content Manufacturer Comments
|
SOURCE RUBBER IS FROM PLANT ONLY 1/2 MILE AWAY. Eco industral focus at Rubberform. ydroelectirc from Niagara Falls.
|
2.3.6 Emissions
| Will adding the recommended pigments increase VOCs beyond what is stated? | Yes No | ||||||||
| Does the product contain any added Urea Formaldehyde? | Yes No | ||||||||
PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE
3.1 LIFE CYCLE ANALYSIS
No information available for this category
Manufacturer Comments
No information available for this category
3.2 Material Extraction and Transportation
3.2.1 Regional Materials
| Location(s) of manufacturing facility(s) producing the reported product | |||||||
|
City, State/Province, Zip, Country:
Lockport NY 14094-2629
|
|||||||
| List Primary Raw Materials in Product: (ie. sand, cement, water, recycled glass, clay, wood, biofiber, etc.): (If a significant percent of the raw materials for this product (excluding water) are sourced from a specific location, please also list percent by weight of material in the product and material source location (town, state, country zip code, country). Be as specific as possible regarding each raw material in the product, but leave the location blank if the material is sourced from many different locations.) | |||||||
|
Material:
recycled rubber from scrap tires-crumb
|
Location:
NY,OH,MA,PA
|
Percent by weight:
100 |
|||||
3.3 MANUFACTURING
3.3.1 Manufacturing and Support Facilities
| Does the company generate energy on-site from renewable resources? | Yes No | ||||||||
| Does the company purchase any thermal energy or electricity from renewable sources? (for electricity this refers to sources that meet the Center for Resource Solutions Green-e Energy National Standard) | Yes No | ||||||||
|
If yes, percent of purchased thermal or electrical energy from renewable energy sources:
100 for manufacturing plant |
If yes, percent of purchased thermal or electrical energy from renewable energy sources:
100 of total company purchase |
||||||||
3.3.2 Manufacturing Process
| What is the company's specified goal for reducing potable water use? | |||||||||
|
Little water is used in our manufacturing process
|
|||||||||
| Are any Hazardous Air Pollutants (as defined by EPA) created, used, or released during the manufacture of the product? | Yes No | ||||||||
|
Are any hazardous chemicals created, used, or released during the manufacture of the product which must be reported under the State Right to Know Act (SARA), Section 313 via the Toxics Release Inventory (TRI)? (The absence of hazardous chemicals or air pollutants in manufacture is laudable. However the presence of such hazards is not a simple indicator of environmental impact. Which listed hazards are present, how they are handled, the magnitude of emissions, and the extent and effectiveness of efforts to minimize creation, use, and releases of such hazards, are all important in assessing environmental responsibility. While it can be problematic to try to compare the performance of different companies, a record of TRI releases by company found on the EPA website allows review of a single company over time. http://www.epa.gov/enviro/html/tris/tris_query.html) |
Yes No | ||||||||
3.4 CONSTRUCTION
3.4.1 Construction Waste Management
| Shipping and Packing Materials (select all that apply for each) | |||||||
|
Pallets:
Reusable
|
Boxes:
Minimized
|
Packing filler:
Not used
|
|||||
|
Containers:
Not used
|
Wrapping:
Minimized
|
||||||
3.4.3 Contract Closeout
| Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs? | Yes No | ||||||||
3.5 FACILITY OPERATIONS
No information available for this category
3.6 DECONSTRUCTION / RECYCLING PHASE
3.6.2 Product Reuse
| Is the entire product reusable? | Yes No | ||||||||
3.6.3 Product Recycling / Disposal
| Is the product currently being recycled into another product? | Yes No | ||||||||
|
If yes, describe what new product(s):
any scrap is given back to our crumb supplier to be re-ground
|
|||||||||
ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments
4.1 Stewardship
| Briefly describe the organizations environmental policies or programs and provide link to them on company website. | ||||||||
|
We do not own the building however if and when you do modifications will be made utilizing eco-friendly initiatives
|
||||||||
| Are there other environmental groups that also list the product(s)? | ||||||||
| Is this product GreenSpec listed? | Yes No | |||||||
4.2 Transparency of Information
No information available for this category
Manufacturer Comments
No information available for this category
COMMENTSThere are currently 0 user comments.
Send Us a Comment
Subscribe