Crown Moulding - Dentil, Egg & Dart, and Acanthus Leaf Corbel

Cast Designs & Supply
manufacturer details and additional products (0) »

BACKGROUNDProduct image • Product description • Contact information

Description: DM721 decorative ornamental plaster moulding is made from USG Molding Plaster #1, Manila Hemp Fiber, and water. Its elegent appearance is derived from being casted from a mold made of a hand-sculpted original model. This product not only can contribute towards 3 different LEED-NC credits, it maintains a Class II Fire Rating as it is non-combustible and will not burn. Please see castdesignsupply.com for more details.
Model or ID numbers: DM721 Crown Moulding
MasterFormat Number(s): 09 54 00, 09 27 00, 09 23 00

Manufacturer:

Cast Designs & Supply
776 Poplar Bluff Road East
Auburntown, TN 37016

info@castdesignsupply.com
(615) 216-6213 (main)

Distribution Channels:

Manufacturer-direct
Distributor(/Representative)
Retail

PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT

2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS

2.2 SUSTAINABLE PERFORMANCE CRITERIA

2.3 SUSTAINABLE COMPOSITION OF PRODUCT

2.3.1 Composition

List the primary materials in a representative sample of the reported product. (List actual material - not trade name)

Gypsum Plaster
Manilla Hemp Fiber (Rapidly Renewable Resource)

2.3.2 Toxicity

Does the product contain any California Proposition 65 chemicals?	Yes No
Does the product contain any Persistent, Bioaccumulative, and Toxic pollutants (PBTs) as listed on the EPA Priority PBT List?	Yes No
Is the MSDS and/or a list of toxics available on company website?	Yes No

2.3.3 Recycled Content

Does the product contain any recycled content material?								Yes No

Rapidly Renewable Materials Manufacturer Comments

The most important component of our product is manilla hemp, a rapidly renewable resource. It provides tensile strength not found in any other natural fibrous substance in the world. 2-3 crops can be grown a year for this amazing material.

Emissions Manufacturer Comments

No tests have been completed in this area, but our product is made of inert components with no VOCs.

PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE

3.1 LIFE CYCLE ANALYSIS

Manufacturer Comments

3.2 Material Extraction and Transportation

3.2.1 Regional Materials

Location(s) of manufacturing facility(s) producing the reported product
City, State/Province, Zip, Country: Auburntown, TN







List Primary Raw Materials in Product: (ie. sand, cement, water, recycled glass, clay, wood, biofiber, etc.): (If a significant percent of the raw materials for this product (excluding water) are sourced from a specific location, please also list percent by weight of material in the product and material source location (town, state, country zip code, country). Be as specific as possible regarding each raw material in the product, but leave the location blank if the material is sourced from many different locations.)
Material: Gypsum Plaster	Location: Shoals, IN	Percent by weight: 55
Material: Water	Location: Auburntown, TN	Percent by weight: 40
Material: Manila Hemp Fiber	Location: Central America	Percent by weight: 5


Raw materials or components are too numerous, are sourced from too wide a region, or are too dispersed for a meaningful answer.			Yes No

3.2.2 Supply Chain

What approximate percent of materials and/or assemblies by weight are sourced from ISO 14001 certified suppliers?

25-50%

3.3 MANUFACTURING

3.3.1 Manufacturing and Support Facilities

Does the company maintain ISO 14001 registration for some or all manufacturing facilities, including international locations?
none
Does the company generate energy on-site from renewable resources?								Yes No

Does the company purchase any thermal energy or electricity from renewable sources? (for electricity this refers to sources that meet the Center for Resource Solutions Green-e Energy National Standard)								Yes No

3.3.2 Manufacturing Process

What is the company's specified goal for reducing energy consumption?
	What steps has the company taken to reduce energy consumption of the manufacturing process? All manufacturing is performed manually with rare mechanical interface.

Does the company participate in any recognized voluntary programs to increase energy efficiency and/or reduce GHG emissions in manufacturing?		Yes No

3.4 CONSTRUCTION

3.4.1 Construction Waste Management

Shipping and Packing Materials (select all that apply for each)
Pallets: Minimized	Boxes: Recyclable	Packing filler: Reusable
Containers: Not used	Wrapping: Not used
Has the company reduced the amount of packaging required?			Yes No
Are there programs in place to reduce environmental impacts of packaging?			Yes No

Does the design of this product include features that reduce amount of excess material/overage required at installation?			Yes No

3.4.3 Contract Closeout

Final Cleaning: Do recommended final cleaning materials emit any known airborne toxins or VOCs?								Yes No

3.5 FACILITY OPERATIONS

3.6 DECONSTRUCTION / RECYCLING PHASE

3.6.1 Manufacturer/Industry Programs

Is there a maintenance/replacement agreement?								Yes No
Is there a buy-back or take-back program for products at end-of-life?								Yes No
If yes, is there a cost to the customer?

3.6.2 Product Reuse

Are components of the product reusable?								Yes No
If yes to either of the above, do installation techniques allow it to be easily removed/disassembled without damage?								Yes No

3.6.3 Product Recycling / Disposal

Is the product currently being recycled into another product?								Yes No

ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments

4.1 Stewardship

4.2 Transparency of Information

Is the environmental information reported in this form available on the website?								Yes No
If yes link to webpage(s): http://castdesignsupply.com/GreenBuilding
Does the company have an environmental policy or sustainability plan available on its website?								Yes No

Does the company produce a corporate sustainability report for public review?								Yes No

Ingredients or materials that comprise the product are fully disclosed on product packaging or in materials accompanying the product								Yes No

Manufacturer Comments

COMMENTSThere are currently 0 user comments.

Send Us a Comment

Are there other environmental groups that also list the product(s)?
Yes. Plug Green at: http://www.pluggreen.com/CastDesignsAndSupply	Is this product GreenSpec listed?	Yes No
Does the company participate in any voluntary programs to reduce environmental impact of the listed product(s)?			Yes No

GreenFormat™

SEARCH FOR

Crown Moulding - Dentil, Egg & Dart, and Acanthus Leaf Corbel

BACKGROUNDProduct image • Product description • Contact information

PRODUCT DETAILS2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS • 2.2 SUSTAINABLE PERFORMANCE CRITERIA • 2.3 SUSTAINABLE COMPOSITION OF PRODUCT

2.1 SUSTAINABLE STANDARDS AND CERTIFICATIONS

2.2 SUSTAINABLE PERFORMANCE CRITERIA

2.3 SUSTAINABLE COMPOSITION OF PRODUCT

PRODUCT LIFE CYCLE3.1 LIFE CYCLE ANALYSIS • Manufacturer Comments • 3.2 Material Extraction and Transportation • 3.3 MANUFACTURING • 3.4 CONSTRUCTION • 3.5 FACILITY OPERATIONS • 3.6 DECONSTRUCTION / RECYCLING PHASE

3.1 LIFE CYCLE ANALYSIS

Manufacturer Comments

3.2 Material Extraction and Transportation

3.3 MANUFACTURING

3.4 CONSTRUCTION

3.5 FACILITY OPERATIONS

3.6 DECONSTRUCTION / RECYCLING PHASE

ADDITIONAL INFORMATION4.1 Stewardship • 4.2 Transparency of Information • Manufacturer Comments

4.1 Stewardship

4.2 Transparency of Information

Manufacturer Comments

COMMENTSThere are currently 0 user comments.

Sponsored By

Questions?

Copyright © 2007-2012

Stay Up to Date with GreenFormat

Has this product, or any product in the product category, gone through a life cycle assessment (LCA)?								Yes No

What is the expected lifespan of the product?
75 years
What is the maximum length of manufacturer's warranty?
1