03 00 00 PASSTHRU

Acti-Gel® 208

2011-05-25 15:10:35.698391

Acti-Gel® 208 is a concrete additive that allows for a reduced amount of Portland Cement in the mix while maintaining the concrete's strength. Water-reducing chemicals and viscosity modifiers can be removed and cement content can be reduced, thereby producing a concrete with less carbon-dioxide and green house gas emissions. It is a patented high purity, self-dispersing magnesium alumino silicate

Xypex Admix C-500

2009-04-23 13:38:01.198993

XYPEX Admix Concrete Waterproofing waterproofs and chemically protects concrete by producing a non-soluble crystalline formation in the pores, capillaries and micro-cracks that block the ingress of water and soluble chemicals. XYPEX Admix will replace coating products in most applications such as foundations, tunnels, septic tanks, manholes, sewer pipes, etc. Xypex Admix is non-toxic and contains no VOC. It is available in pre-measured soluble bags to facilitate addition to the concrete mix at the time of batching.

VOCOMP®-30

2008-08-20 13:32:44.299701

VOCOMP-30 is a ready-to-use, 30% solids Concrete Curing and Sealing Compound formulated of special acrylic polymers in a true water-base carrier. VOCOMP-30 provides improved resistance to rain, sun, freezing temperatures, most acids and industrial chemicals, petroleum, deicing salts, cleaning agents (except aromatic solvents), diluted caustics and other pollutants. Color-wise, VOCOMP-30 appears "milky-white" in the container and when first applied, leaves a "bluish" cast on the concrete for easy visual coverage. VOCOMP-30 dries clear to provide a transparent sheen finish. This sheen can be controlled by the number of coats applied. VOCOMP-30 meets maximum VOC content limits of 700 g/L for Concrete Curing and Sealing Compounds as required by the U.S. EPA Architectural Coatings Rule.

VOCOMP®-25

2008-08-20 13:31:37.995324

VOCOMP-25 Water-Base Acrylic Concrete Sealer is a ready-to-use concrete curing and sealing compound formulated of special acrylic polymers in a true water-base carrier. VOCOMP-25 provides improved resistance to rain, sun, freezing temperatures, most acids and industrial chemicals, petroleum, deicing salts, cleaning agents (except aromatic solvents), diluted caustics and other pollutants. VOCOMP-25 appears “milky white” in the container and, when first applied, leaves a “bluish” cast on the concrete for easy visual coverage. VOCOMP-25 dries clear to provide a transparent sheen finish. This sheen can be controlled by the number of coats applied. The VOC content of VOCOMP-25 is 200 g/ L, which is substantially less than the maximum limit of 700 g/L required by the US EPA Architectural Coatings Rule.

VOCOMP®-20

2008-08-20 13:30:35.72874

VOCOMP-20 water-based acrylic curing and sealing compound is formulated using special acrylic polymers in a true water-based carrier. Once properly applied, VOCOMP-20 provides a nearly impermeable seal for efficient moisture retention. VOCOMP-20 appears “milky white” in the container and, when first applied, leaves a “bluish” cast on the concrete for easy visual confirmation of coverage. VOCOMP-20 dries clear to provide a transparent sheen finish. The sheen can be controlled by the number of coats applied. VOCOMP-20 resists yellowing from ultraviolet exposure and provides a durable, long-lasting finish that offers improved resistance to chemicals, petroleum and abrasives. VOCOMP-20 will minimize hair-checking, premature cracking, dusting and spalling. However, good concrete and good concreting practices should be used, as VOCOMP-20 is not a cure-all for improperly mixed or placed concrete. VOCOMP-20 meets the very strict maximum VOC content limits of 100 g/L for sealers as required by certain California Air Pollution Control Districts, as well as the 400 g/L VOC maximum required by the U.S. EPA Architectural Coatings Rule.

LIQUI-HARD®

2008-08-20 13:05:39.889595

LIQUI-HARD concrete densifier and chemical hardener compound is a ready-to-use, colorless liquid, formulated with chemically reactive raw materials to harden and dustproof concrete. When properly applied, LIQUI-HARD will offer substantial improvement in abrasion and chemical resistance and will significantly improve the durability of the concrete surface when compared to untreated concrete. As LIQUI-HARD is applied and penetrates into the concrete surface, a chemical reaction takes place, producing a byproduct that fills in the pores of the concrete. This process produces a substantially denser concrete surface with enhanced durability. In addition to the densifying and hardening action, LIQUI-HARD also solidifies the concrete, eliminating dusting and pitting. LIQUI-HARD meets maximum VOC content limits of 400 g/L for Concrete Protective Coatings as required by the U.S. EPA Architectural Coatings Rule. Concrete properly treated with LIQUI-HARD is USDA-accepted.

LIQUI-HARD® ULTRA

2008-08-20 13:05:39.889595

LIQUI-HARD ULTRA molecular concrete densifier and chemical hardener is a ready-to-use, colorless liquid, which hardens and dustproofs concrete at a molecular level. When properly applied, LIQUI-HARD ULTRA will offer substantial improvement in abrasion and chemical resistance and will significantly improve the durability of the concrete surface when compared to untreated concrete. As LIQUI-HARD ULTRA is applied and penetrates into the concrete surface, a chemical reaction takes place, producing a byproduct that fills in the pores of the concrete one molecule at a time. In addition to the densifying and hardening action, LIQUI-HARD ULTRA also solidifies the concrete, eliminating dusting and pitting. LIQUI-HARD ULTRA complies with the maximum allowable VOC content limits set by the U.S. EPA Architectural Coatings Rule, the OTC Rule and the SCAQMD Rule. Concrete properly treated with LIQUI-HARD ULTRA is USDA-accepted.

BELLATRIX

2008-08-20 12:23:20.24223

BELLATRIX is a water-based hybrid system, composed of unique polymers, specifically formulated to provide the dual actions of penetrating and topical protection for concrete. The product is clear, transparent and easy-to-apply. BELLATRIX has been formulated with proprietary technology to provide increased stain suspension and resistance to most contaminants found in kitchens, retail food stores, restaurants, malls, garages, warehouses, distribution centers, etc. The product has been designed to produce a clear, high-gloss barrier, offering optimum protection for concrete. BELLATIRX meets the very strict maximum VOC content limits of 100 g/L for Waterproofing/Concrete Masonry Sealers, as required by California's SCAQMD, the 400 g/L VOC maximum required for Sealers by the U.S. EPA Architectural Coatings Rule, and the 400 g/L maximum VOC required for Waterproofing/Concrete Masonry Sealers by the OTC Architectural Coatings Rule.

03 00 00 __PASSTHRU__

Acti-Gel® 208

Xypex Admix C-500

VOCOMP®-30

VOCOMP®-25

VOCOMP®-20

LIQUI-HARD®

LIQUI-HARD® ULTRA

BELLATRIX

03 00 00 PASSTHRU