07 00 00 Thermal and Moisture Protection

ICA-LITE EPS Panels by ICA

2011-03-21 12:56:08.622734

ICA-LITE EPS Panels by ICA is an expanded polystyrene insulation panel of rigid closed cell lightweight plastic foam. It is designed for use in foundation, wall, and roof insulation systems in new commercial or residential buildings. It is also used extensively in low temperature warehouses, food processing plants, agricultural buildings, and a variety of retrofit applications. ICA-LITE EPS Panels by ICA can be engineered to provide density ranges from 0.90 to 1.80 pounds per cubic foot.

Sika Sarnafil EnergySmart Roof System

2010-01-06 15:53:41.464129

Sika Sarnafil’s EnergySmart White Roof® has a highly reflective, lacquer coated surface that has been proven to reduce the amount of energy required to maintain comfort in an air-conditioned building by decreasing heat flow through the building envelope. A “cool roof” such as Sika Sarnafil’s, can save money, improve occupant comfort, increase a roof’s longevity, and reliably protect a building and its contents. Sika Sarnafil’s EnergySmart Roof® utilizes Sarnafil, reinforced, thermoplastic membrane that can be mechanically attached or adhered to approved substrates. A variety of thicknesses from 48 mil (1.2) to 80 mil (2.0) are standard and well as three roll widths, 5 ft. (1.5 meters), 6.5 ft. (2 meters ), and 10ft. (3 meters). Sika Sarnafil’s Sarnafil S327 and G410 membranes have more than 45 years of proven performance and were one of the first roofing membranes labeled under the EPA’s ENERGY STAR® program. With an SRI value (Solar Reflective Index) of 104 and both Pre- and Post Consumer membrane being utilized in the sheet, it makes the EnergySmart Roof one of the most sustainable roofing membranes in the industry.

Sika Sarnafil Green (vegetated) Roof System

2010-01-06 15:53:41.464129

Performance over time is the only true test of a waterproofing system’s quality. Sika Sarnafil has been waterproofing green roofs and other landscaped areas across Europe for over 40 years and in the United States for over 30 years. When you specify a Sarnafil Green Roof, you get more than watertight security; you get peace of mind knowing you made the right choice. Sika Sarnafil’s Sarnafil G476 thermoplastic membrane is a key component in the Green Roof System. Sika Sarnafil has been using the same basic formulation in its manufacturing process for over 40 years. The Sarnafil G476 membrane is specially designed for sub-grade environments, compounded to remain watertight in extreme conditions including constant dampness, ponding water, high and low alkaline conditions, exposure to plant roots, fungi and bacterial organisms. The Sarnafil G476 thermoplastic membrane’s seams are also hot-air welded to provide a watertight, monolithic sheet. Sika Sarnafil has green roof systems for use on both concrete and metal deck applications. Sika Sarnafil’s Green Roof System can be installed three different ways; loose-laid, adhered or loose-laid with grid strips in order to provide the flexibility to choose the waterproofing application that best fits your buildings design criteria.

GFP Gas Filled Panel Insulation

2009-06-08 12:32:13.297678

GFP Insulation is an advanced insulation technology. The product is composed of two external aluminum foil/polymer laminates and five internal specially formulated, aluminum metalized films. When expanded, the internal, low-emittance aluminum layers form a honeycomb structure. These sealed exterior aluminum foil barrier films provide thermal resistance, flammability protection, and properties to contain air or a low-conductivity inert gas. GFP Insulation incorporates an advanced design and specially formulated components to effectively address the three methods of heat transfer: radiation, conduction and convection.

Xypex Concentrate

2009-04-23 12:54:23.939947

Applied as a slurry mixture, Xypex Concentrate is a non-toxic chemical treatment for the waterproofing and protection of concrete, concrete block, shotcrete and mortar. When applied as a slurry mixture on wet concrete, the reactive chemicals in Xypex penetrate and plug the pores, capillaries and micro-cracks in concrete with a crystalline formation that becomes a permanent, integral part of the structure. Xypex can be applied on the positive or negative side and contains no VOC.

Sure Cavity

2009-01-16 14:33:14.58762

-The adhered fabric blocks mortar or stucco from filling the drainage channels and acts as a bug screen at terminations -It has superior appearance on thin veneers vs. furring strips due to less ridging, cracking, and waviness -It saves installation time (half the time of furring strips and backer board) -High impact polystyrene ensures durability, rigidity, and longevity -Vertical channels promote rapid drainage -Perforations allow cross-ventilation for better drying -Compartmentalized channels promote pressure equalization -It prevents bridging -Exceeds ASTM E-2273 UV Tested - Over 9 Weeks

EZ Hatch Attic Access Scuttle Door

2008-11-26 09:43:03.141075

New Building Codes require attic access to be insulated R-30 to R-49+. Per 2009 IECC Section 402.2.3 and 2009 IRC Section N1102.2.3 reads: "Access hatches and doors. Access doors from conditioned spaces to unconditioned spaces (e.g., attics and crawl spaces) shall be weatherstripped and insulated to a level equivalent to the insulation on the surrounding surfaces." A minimum of R-30 to R-49+ is now required! Battic Door Energy Conservation Products introduces the E-Z Hatch Attic Access Door System For Energy Star Home and Green Building Contractors. The E-Z Hatch Attic Access Door System is an easy to install, R-42 insulated, pre-finished attic access door system that installs into the ceiling in minutes and provides a sealed, energy-efficient, 22x30” access opening into the attic space. Developed by Contractors as an alternative to energy wasting pull down attic stairs, the E-Z Hatch installs in minutes with only a utility knife and a screwdriver. Designed for use in new construction or retrofit applications for Contractors and do-it-yourselfers. The unit consists of a wood frame, an insulated door, and all interior trim. The E-Z Hatch overhead attic access door system is highly insulated and triple-weatherstripped to provide the maximum energy conservation possible. Available in 22" x 30" for new construction or retrofit, the E-Z Hatch Attic Access Door exceeds all Building and Energy Code requirements, including the new Energy-Star Thermal Bypass requirements. Special introductory pricing is available. The door is made of Expanded Polystyrene foam that provides an insulation value of R-42. The lightweight door opens with little effort, allowing easy entry into the attic space. The finished face on the door fits tightly into the finished trim when the door closes. Engineered for use with any type of insulation, including blown-in insulation. The tall wood frame acts as an insulation dam, which holds the insulation back from the opening, and takes the mess out of getting into the attic space. Available at your local Building Supply Center, or Factory Direct by mail order. For complete details, visit on line at http://www.batticdoor.com, or tel. 508.320.9082 or email info@batticdoor.com Battic Door Energy Conservation Products manufactures and distributes low-cost, high-value, energy conservation products for the SIX largest overlooked "holes" in the house: The pull-down attic stairs, the whole house fan and A/C return, the fireplace, the clothes dryer exhaust duct, the bathroom exhaust fan duct, and the attic access door hatch. By sealing these "holes", air leaks, cold drafts, and wasted energy are reduced. The products work year 'round by reducing cold drafts and heat loss in the winter, as well as air-conditioning loss in the summer. The products conserve energy, lower your utility bills, reduce noise and pollutants, improve indoor air quality, reduce the chance of ice dams and attic mold, and improve the comfort of your home. Contractors preferred supplier, the products are available direct to customers by mail order, also available in bulk to builders, weatherization contractors, and distributors. Visit Battic Door Energy Conservation Products on line at http://www.batticdoor.com, or tel. 508.320.9082 or email info@batticdoor.com.

Whole House Fan Shutter Cover

2008-11-26 09:43:03.141075

Battic Door Energy Conservation Products introduces the Whole House Attic Fan Insulation Shutter Seals and Covers for Energy Star Home and Green Building Contractors. The Battic Door Whole House Attic Fan Ceiling Shutter Seal is an energy-saving insulating seal for Whole House Attic Fans. It reduces air-leakage through the whole house attic fan saving the homeowner heating and cooling loss and energy costs. The Battic© Door Whole House Attic Fan Ceiling Shutter Seal is easily installed over the fan louver from the house side in the fall and removed in the spring. By reducing the amount of heat and moisture leaking into your attic, the severity of ice dams and attic mold is greatly reduced! Available Factory Direct by mail order. For complete details, visit on line at http://www.batticdoor.com, or tel. 508.320.9082 or email info@batticdoor.com Battic Door Energy Conservation Products manufactures and distributes low-cost, high-value, energy conservation products for the SIX largest overlooked "holes" in the house: The pull-down attic stairs, the whole house fan and A/C return, the fireplace, the clothes dryer exhaust duct, the bathroom exhaust fan duct, and the attic access door hatch. By sealing these "holes", air leaks, cold drafts, and wasted energy are reduced. The products work year 'round by reducing cold drafts and heat loss in the winter, as well as air-conditioning loss in the summer. The products conserve energy, lower your utility bills, reduce noise and pollutants, improve indoor air quality, reduce the chance of ice dams and attic mold, and improve the comfort of your home. Contractors preferred supplier, the products are available direct to customers by mail order, also available in bulk to builders, weatherization contractors, and distributors. Visit Battic Door Energy Conservation Products on line at http://www.batticdoor.com, or tel. 508.320.9082 or email info@batticdoor.com.

DELUXE EZ Hatch Attic Access Scuttle Door

2008-11-26 09:43:03.141075

New Building Codes require attic access to be insulated R-30 to R-49+. Per 2009 IECC Section 402.2.3 and 2009 IRC Section N1102.2.3 reads: "Access hatches and doors. Access doors from conditioned spaces to unconditioned spaces (e.g., attics and crawl spaces) shall be weatherstripped and insulated to a level equivalent to the insulation on the surrounding surfaces." A minimum of R-30 to R-49+ is now required! Battic Door Energy Conservation Products introduces the DELUXE E-Z Hatch Attic Access Door System For Energy Star Home and Green Building Contractors. The E-Z Hatch Attic Access Door System is an easy to install, R-42 insulated, pre-finished attic access door system that installs into the ceiling in minutes and provides a sealed, energy-efficient, 22x30” access opening into the attic space. DELUXE model adds a 4-point keyed locking latch and 2 recessed handles. Developed by Contractors as an alternative to energy wasting pull down attic stairs, the E-Z Hatch installs in minutes with only a utility knife and a screwdriver. Designed for use in new construction or retrofit applications for Contractors and do-it-yourselfers. The unit consists of a wood frame, an insulated door, and all interior trim. The E-Z Hatch overhead attic access door system is highly insulated and triple-weatherstripped to provide the maximum energy conservation possible. Available in 22" x 30" for new construction or retrofit, the E-Z Hatch Attic Access Door exceeds all Building and Energy Code requirements, including the new Energy-Star Thermal Bypass requirements. Special introductory pricing is available. The door is made of Expanded Polystyrene foam that provides an insulation value of R-42. The lightweight door opens with little effort, allowing easy entry into the attic space. The finished face on the door fits tightly into the finished trim when the door closes. Engineered for use with any type of insulation, including blown-in insulation. The tall wood frame acts as an insulation dam, which holds the insulation back from the opening, and takes the mess out of getting into the attic space. Available at your local Building Supply Center, or Factory Direct by mail order. For complete details, visit on line at http://www.batticdoor.com, or tel. 508.320.9082 or email info@batticdoor.com Battic Door Energy Conservation Products manufactures and distributes low-cost, high-value, energy conservation products for the SIX largest overlooked "holes" in the house: The pull-down attic stairs, the whole house fan and A/C return, the fireplace, the clothes dryer exhaust duct, the bathroom exhaust fan duct, and the attic access door hatch. By sealing these "holes", air leaks, cold drafts, and wasted energy are reduced. The products work year 'round by reducing cold drafts and heat loss in the winter, as well as air-conditioning loss in the summer. The products conserve energy, lower your utility bills, reduce noise and pollutants, improve indoor air quality, reduce the chance of ice dams and attic mold, and improve the comfort of your home. Contractors preferred supplier, the products are available direct to customers by mail order, also available in bulk to builders, weatherization contractors, and distributors. Visit Battic Door Energy Conservation Products on line at http://www.batticdoor.com, or tel. 508.320.9082 or email info@batticdoor.com.

MEL-ROL® LM

2008-08-20 13:13:27.135624

MEL-ROL LM is a single-component, polymer-modified, cold-applied, water-base, liquid waterproofing membrane ideal for below-grade vertical seamless waterproofing applications. We have taken the same high quality rubber polymers found in MEADOWS’ successful MEL-ROL “peel and stick” membrane, and converted them into a heavy-bodied, high solids, quick drying liquid membrane. With MEL-ROL LM, installation time is reduced, utilizing either a spray or roller application. A variety of different protection courses, insulation boards or drainage boards can be imbedded into the membrane to create a superior waterproofing system. With the application of PERMINATOR® vapor mat over the membrane, a composite system can be created that has the combined advantages of both “peel and stick” and fluid-applied membranes