All Divisions

Protecta HIR 300 Type X with Mold Defense

2010-07-21 22:11:26

High Impact resistant gypsum board enhanced with glass fibers and high strength fiberglass mesh. Meets ASTM C 1629 hard and soft body impact Level 3. ASTM C1396 Type X for fire rating. Mold and mildew resistant - 10 out of 10 per ASTM D3273

Lafarge Mold Defense Type X

2010-07-21 21:41:52

Lafarge 5/8" Mold Defense Type X is designed for use in interior wall and ceiling applications and offers enhanced protection against mold and mildew. It contains a non-combustible mold, mildew and moisture treated gypsum core and treated face paper. Meets ASTM C 1396 Section 7, Type X Mold Resistance per ASTM D 3273 - score 10

Lafarge Firecheck Type X

2010-07-21 16:58:46

Lafarge 5/8" Firecheck Type X is a gypsum board enhanced with glass fibers to offer greater strength and fire protection for interior walls and ceilings. Meets ASTM C 1396 Section 5, Type X

Lafarge Weather Defense Type X Exterior Sheathing

2010-07-21 16:58:46

Lafarge 5/8" Weather Defense Type X Exterior Sheathing is a fiberglass faced exterior board designed to be mold & mildew resistant and resistant to deterioration for up to 12 months in normal weather conditions. Meets ASTM C 1396 Type X

COOLWALL® System

2010-07-19 19:29:20

The TEX-COTE® COOLWALL® System is a low VOC infrared heat reflective exterior wall coatings system that has been tested and proven to reduce wall surface temperatures by up to forty degrees and provide for cooling cost energy savings. The COOLWALL® System incorporates post-industrial recycled content in to its manufacturing process at levels high enough to make it eligible for LEED credits under the "Materials and Resources" category. In fact, the COOLWALL® System can contribute to up to three of the six LEED categories.

SMARTdri High-Efficiency Intelligent Hand Dryer

2010-06-29 16:46:45

SMARTdri™ is the newest hi-speed hand dryer developed by World Dryer Corporation and is the most environmentally friendly warm air hand dryer available. SMARTdri™ requires only 800 watts to deliver the fastest dry time (10 seconds) of any hand dryer – up to 58% less energy than other hi-speed hand dryers and more than 88% less energy than traditional hand dryers. SMARTdri’s lowest energy consumption of any hi-speed hand dryer on the market yields outstanding savings in cost of operation and conserving natural resources. Compared to the use of paper towels, SMARTdri™ represents more than 99% savings. SMARTdri™ includes flexible control options to permit customization of the dryer’s performance to optimize dry time, low energy consumption and sound. SMARTdri™ controls enable operation as low as 400 watts. SMARTdri™ helps energy-conscious businesses and other public and private institutions qualify for valuable LEED (Leadership in Energy and Environmental Design) credits while showing their customers, visitors and employees that the environment matters. SMARTdri™ is designed and manufactured to achieve the best air performance, dry time and extended service life compared to other available hi-speed dryers. SMARTdri™ incorporates a proprietary, high efficiency motor that delivers the longest service life of any motor available in hi-speed dryers – 2 to 3 times longer. The motor is 36% efficient compared to other hand dryers that are just 10 – 20% efficient. While delivering long life and efficiency, the motor produces an airflow that is more than 20% stronger than any competing hand dryer – resulting in the fastest dry time (10 seconds). SMARTdri™ is also focused on enhancing the hygiene of hand drying. The entire air flow path within the dryer and its exterior surface includes an anti-microbial treatment which reduces the growth and spread of bacteria, mold and fungus.

VaporBlock® Plus™ 20 - Gas & Moisture Barrier - Class A

2010-06-07 15:42:10

VaporBlock® Plus™ gas/moisture underslab barrier is made from state-of-the-art polyethylene and barrier resins to provide unmatched impact strength as well as superior resistance to gas and moisture transmission. VaporBlock® Plus™ is a seven-layer co-extruded gas and moisture barrier designed to restrict naturally occurring gases such as radon and/or methane from migrating up through concrete slabs. VaporBlock Plus offers the performance you have come to rely on with our proven VaporBlock line combined with superior resistance to gas offering 100 times more protection against methane and other VOC’s than premium polyethylene barriers. VaporBlock Plus meets all requirements of ASTM E-1745, Class A, B & C and is produced under the strict guidelines of our ISO 9001:2008 certified management system. VaporBlock Plus is available in a 20 mil (10’ x 150’) roll along with (VaporBond Plus) seaming tape and pipe boot kits (VaporBoot Plus) to provide a complete and thorough system of protection against gas and moisture.

VaporBlock® 6, 10 & 15 - Vapor Barriers/Retarders - Class A & C

2010-06-07 15:42:10

VaporBlock® is a high performance underslab vapor barrier designed to retard moisture migration through concrete slabs. This product is made from state-of-the-art polyethylene resins that provide superior physical and performance properties that far exceed ASTM E-1745 (Plastic Water Vapor Retarders Used in Contact with Soil or granular Fill Under Concrete Slabs) Class A, B and C requirements. High tensile strength, unequaled puncture resistance, ultralow moisture vapor permeability as well as resistance to decay make VaporBlock one of the most effective underslab vapor barriers on the market today! Available in 6,10 and 15 mil thicknesses to best meet required performance specifications. VaporBlock protects your flooring and other moisture sensitive furnishings in your building’s interior from moisture migration. VaporBlock can also greatly reduce condensation, mold and degradation by controlling water vapor migration. VaporBlock 6 &10 are available in 15’ wide rolls by 200’ long for ease of installation and maximum coverage. VaporBlock 15 is available in 12’ wide rolls by 200’ long. Accessories include VaporBond seaming tape and VaporBoot pipe boots systems along with Butyl Seal double sided tape for a complete and professional installation.

Conkure™ - Wet Curing Blanket

2010-06-07 15:42:10

Conkure™ Wet Curing Blanket consists of a highly absorbent synthetic needle punched fabric coated with a white reflective film. Unlike burlap, it will not rot or mildew. Conkure™ Blankets are lightweight and disposable making them an economical choice in concrete curing and yet are versatile and strong enough to be reused when cared for properly. Conkure™ Wet Curing Blanket is a reflective blanket specifically designed to be hydrated and inhibit moisture loss during the curing process of concrete. It will also significantly reduce heating of the concrete surface caused by the sunlight in hot weather conditions. The American Concrete Institute claims that moist curing is the best method for developing the strength of concrete and minimizes early drying shrinkage in their publication ACI 305R-99 (chapter 4.4.2) Conkure™ Wet Curing Blanket meets and exceeds AASHTO M-171 and ASTM C-171, “Standard Specification for Sheet Materials for Curing Concrete” for moisture retention and daylight reflection. Conkure™ Wet Curing Blanket is rolled with the absorbent fabric side out onto a heavy duty cardboard core for ease of handling and installation. Conkure Blankets are available in a standard size of 9’ X 250’ rolls.

Fortress™ - Weather Barrier "Air & Moisture Control"

2010-06-07 15:42:10

FORTRESS™ Weather Resistive Barrier consist of a woven polyethylene fabric reinforced with high density ribbons resulting in excellent tear and puncture resistance. FORTRESS is protected from the sun’s harsh ultra-violet rays with a durable UV stabilization package. FORTRESS Weather Resistive Barrier is applied under the structures exterior siding to minimize costly moisture damage and prevent energy robbing air infiltration. Available in 9' and 10' widths in lengths of 100', 150', & 195' rolls. Full system includes (Fortress) seaming tape and Fortress window and door flashing (Flexshield & Flashshield) for a complete energy efficient installation.